Please wait a minute...
J4  2012, Vol. 46 Issue (8): 1472-1477    DOI: 10.3785/j.issn.1008-973X.2012.08.018
能源工程     
柴油机正时齿轮系动力学特性分析
李一民, 郝志勇, 叶慧飞
浙江大学 能源工程学系,浙江 杭州 310027
Dynamic characteristic analysis of diesel timing gear trains
LI Yi-min, HAO Zhi-yong, YE Hui-fei
College of Energy Engineering,Zhejiang University,Hangzhou 310027,China
 全文: PDF  HTML
摘要:

为了分析柴油机正时齿轮系的动力学特性以及对前端噪声的影响,建立正时齿轮系的多体动力学模型.分析考虑各齿轮负载及曲轴角速度波动时的齿轮扭转角位移、啮合齿对相对运动以及动态啮合力,并对比了不考虑曲轴角速度波动时的计算结果.结果表明,由曲轴扭振引起的角速度波动能够明显加大齿轮系的振动与冲击.凸轮轴齿轮扭转角位移的实验结果与计算结果较为一致.前端声强实验表明在1 000 Hz以下,齿轮系动态特性对噪声影响较大,高频处由齿轮加工精度影响的传递误差引起的噪声较大.通过设计曲轴扭振减振器,可以改善齿轮系的啮合振动与冲击,相应地减小前端的辐射噪声.

Abstract:

 To analyze dynamic characteristic of diesel timing gear trains and whose influence on noise of engine front, muti-body dynamic model of diesel timing gear trains was established. Gear torsional angular displacement, relative motion in the tooth pair meshed and dynamic meshing force were analyzed considering gear trains loads and crankshaft angular velocity fluctuation, which were compared with that without considering crankshaft angular velocity fluctuation. Results showed that angular velocity fluctuation caused by crankshaft torsional vibration can increase vibration and shock among gear trains obviously. Test result of camshaft gear torsional angular displacement was consistent with the simulation result. Front sound intensity experiment displayed that radiated noise is mainly affected by dynamic characteristic of gear trains below 1000 Hz and by transmission error due to machining accuracy in high frequency range. Through design of crankshaft torsional vibration damper, meshing vibration and shock of gear trains can be improved and the radiated noise can be reduced correspondingly.

出版日期: 2012-09-23
:  TK 402  
通讯作者: 郝志勇,男,教授,博导.     E-mail: haozy@zju.edu.cn
作者简介: 李一民(1985—),男,博士生,从事内燃机振动噪声控制及现代设计方法研究.E-mail:yiminli@zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

李一民, 郝志勇, 叶慧飞. 柴油机正时齿轮系动力学特性分析[J]. J4, 2012, 46(8): 1472-1477.

LI Yi-min, HAO Zhi-yong, YE Hui-fei. Dynamic characteristic analysis of diesel timing gear trains. J4, 2012, 46(8): 1472-1477.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2012.08.018        http://www.zjujournals.com/eng/CN/Y2012/V46/I8/1472

[1] ASHLEY L,DONALD R,TEIK C.Methods for researching gear whine in automotive transaxles [J]. SAE Paper, 1999, 01: 1768.
[2] FORCELLI A,GRASSO C,PAPPALARDO T.The transmission gear rallte noise: parametric sensitivity study [J]. SAE Paper, 2004, 01: 1225.
[3] 郭磊,郝志勇,蔡军等.汽车变速箱齿轮传动系动力学振动特性的研究[J].振动与冲击,2010,29(1): 103-107.
GUO Lei, HAO Zhiyong, CAI Jun, et al.Vibration characteristics of transmission geartrain for a car [J]. Journal of Vibration and Shock, 2010, 29(1): 103-107.
[4] 庞剑,谌刚,何华.汽车噪声与振动——理论与应用[M].北京:北京理工大学出版社,2006: 166.
[5] 谭达明.内燃机振动控制[M]. 成都:西南交通大学出版社,1993: 106.
[6] 舒歌群,高文志,刘月辉.动力机械振动与噪声[M]. 天津:天津大学出版社,2008: 240-243.
[7] MARK G, TEIK C, GLEN C. Dynamic analysis of automotive gearing system [J]. SAE Paper, doi:10.4271/920762.
[8] 王炎,马吉胜,蒙刚,等.基于虚拟样机的齿轮系统非线性扭转振动分析[J].机械工程师,2007,11: 23-25.
WANG Yan,MA Jisheng,MENG Gang, et al.The nonlinear analysis of gear system rotational vibration based on virtual prototyping[J].Mechanical Engineer,2007,11: 23-25.
[9] 王建军,李润方.齿轮系统动力学的理论体系[J].中国机械工程,1998,9(12): 55-58.
WANG Jianjun,LI Runfang. The theoretical system of the gear vibration theory [J].China Mechanical Engineering,1998,9(12): 55-58.

[10] 王立华,李润方,林腾蛟,等.齿轮系统时变刚度和间隙非线性振动特性研究[J].中国机械工程,2003,14(13): 1143-1146.
WANG Lihua,LI Runfang,LIN Tengjiao, et al. Research on nonlinear vibration characteristics due to timevarying mesh stiffness and gear backlash in gear system [J].China Mechanical Engineering,2003,14(13): 1143-1146.
[11] 徐立强,左淼都.应用Excite_TD软件进行齿轮传动分析[C]∥AVL年会论文. 南昌:[s.n],2010: 72-76.
XU Liqiang,ZUO Miaodu.Application of Excite_TD software on gear train analysis [C]∥ Proceedings of AVL. Nanchang: \
[s.n\], 2010: 72-76.
[12] 段秀兵,郝志勇,岳东鹏,等.汽车发动机曲轴扭振的多体动力学分析[J].汽车工程,2005,25(2): 233-236.
DUAN Xiubing,HAO Zhiyong,YUE Dongpeng, et al. Multibody dynamics analysis on torsional vibration of automotive engine crankshaft [J]. Automotive Engineering.2005,25(2): 233-236.
[13] MINGFENG L, JIE D, TEIK L. Active control of gear mesh dynamics [J]. SAE Paper, 2011, 01: 1635.
[14] 方华,王天灵,李盛成.拓扑优化技术在降低正时齿轮罩辐射噪声中的应用[J].农业机械学报,2009,40(12):48-50.
FANG Hua, WANG Tianling, LI Shengcheng.Design of low noise for timing gear cover based on topology ptimization[J].Transactions of the Chinese Society for Agricultural Machinery. 2009,40(12): 48-50.

[1] 李一民,郝志勇,杜极生. 发动机曲轴与正时系耦合动力学研究[J]. J4, 2013, 47(9): 1650-1657.
[2] 刘联鋆, 郝志勇, 钱欣怡. 空滤器滤芯声学特性的仿真方法[J]. J4, 2012, 46(10): 1784-1789.
[3] 李一民,郝志勇,曾小春. 考虑油膜润滑的连杆有限元分析[J]. J4, 2012, 46(7): 1233-1237.
[4] 李佳, 刘震涛, 刘忠民, 谭永南, 俞小莉. 空气滤清器流动过程仿真与试验分析[J]. J4, 2012, 46(2): 327-332.
[5] 肖宝兰, 俞小莉, 韩松, 陆国栋, 夏立峰. 基于神经网络的换热器翅片参数灵敏度分析[J]. J4, 2011, 45(1): 122-125.
[6] 肖宝兰, 俞小莉,韩松,陆国栋,夏立峰. 翅片参数对车用中冷器流动传热性能的影响[J]. J4, 2010, 44(11): 2164-2168.
[7] 肖宝兰, 俞小莉, 钟勋, 韩松, 夏立峰. 纳米流体流动传热性能的实验与模拟研究[J]. J4, 2010, 44(6): 1149-1154.