Please wait a minute...
浙江大学学报(工学版)
J4  2012, Vol. 46 Issue (5): 923-928    DOI: 10.3785/j.issn.1008-973X.2012.05.024
机械工程、工程力学     
自由表面旋涡的识别方法
江俊,唐任仲,李培玉
浙江大学 机械工程学系,浙江 杭州 310027
A novel free-surface vortex identification method
JIANG Jun,TANG Ren-zhong,LI Pei-yu
Department of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China
 全文: PDF  HTML
摘要：

针对目前自由表面旋涡识别所存在的精确性低、计算量大、实用性差的问题,提出一种新的自由表面旋涡识别方法.该方法建立基于图像识别的自由表面旋涡识别系统,实现图像获取、采集、处理及旋涡识别的功能.为了解决系统中旋涡识别的难点问题,提出一种二维图像中旋涡的识别及定位方法.该方法利用旋涡图像的局部对称性,通过分析图像中旋涡周围流线的方向场,使用改进后的缠绕角度法计算相应的缠绕角度值,最终实现自由表面旋涡的识别及涡核中心的定位.实验表明,该方法识别速度快且具有较高的准确,稳定及有效性.
Abstract:

In order to solve the existing problems within identification of free-surface vortex, such as low accuracy, large computation and poor availability, a novel free-surface vortex identification method was proposed. This method established a real-time free-surface vortex identification system which based on image recognition technology, and realized image acquisition, sampling, processing and vortex identification. To address the difficulties of vortex identification in this system, a proper vortex identification and location within two-dimensional image approach was put forward. This approach using the local symmetry of the vortex image, analyzed the direction of streamlines around vortex field in image, calculated the corresponding angle value by improved winding angle method, and ultimately achieved to recognize free-surface vortex and find vortex core. Experiments show that this method has not only a high recognition speed and accuracy, but also well-behaved stability and effectiveness.
出版日期: 2012-05-01
:  TP 391.41  
通讯作者: 李培玉，男，副教授.     E-mail: lipeiyu@zju.edu.cn
作者简介: 江俊（1983-），男，博士生，从事图像处理及转炉出钢下渣检测的研究.E-mail: heifetz@zju.edu.cn
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

江俊,唐任仲,李培玉. 自由表面旋涡的识别方法[J]. J4, 2012, 46(5): 923-928.

JIANG Jun,TANG Ren-zhong,LI Pei-yu. A novel free-surface vortex identification method. J4, 2012, 46(5): 923-928.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2012.05.024    或    http://www.zjujournals.com/eng/CN/Y2012/V46/I5/923

［1］ 沈遐龄,高沈歌,刘宝杰,等,旋涡发生器对机翼最大升力和失速迎角的影响 ［J］. 北京航空航天大学学报, 1998, 24(3):311-314．
SHEN Xialing,GAO Shenge,LIU Baojie，et al. Effects of vortex generators on maximum lift and stall angle of attack over wings \
[J\].Journal of Bei Jing University of Aeronautics and Astronatics, 1998,24(3):311-314.
［2］ 罗德海,卢燕.海洋中地形强迫的孤立涡旋的演变及其相互作用 ［J］. 海洋学报,1999,21(6)：1-8．
LUO Dehai, LU Yan. Evolution of solitary eddies over a Gaussian topograpy and their interaction\
[J\].Acta oceanologica sinica, 1999,21(6):1-8.
［3］ NOVIKOV A E. Vortexsink dynamics ［J］. Physical Review E, 1996, 54(4):109．
［4］ KWON Y J, ZHANG J, LEE H G. Water model and CFD studies of bubble dispersion and inclusions removal in continuous casting mold of steel ［J］. ISIJ International, 2006, 46(2):257-266．
［5］ LUGT H J. Vortex flow in nature and technology ［M］. New Jersey: John Wiley & Sons, 1972．
［6］ LEVY Y, DEGANI D, SEGINER A. Graphical visualization of vortical flows by means of helicity ［J］. AIAA Journal, 1990, 28(8):1347-1352．
［7］ BERDAHL C H, THOMPSON D S, Eduction of swirling structure using the velocity gradient tensor ［J］. AIAA Journal, 1993, 31(1):97-103．
［8］ HUA B, KLEIN P. An exact criterion for the stirring properties of nearly twodimensional turbulence ［J］. Physica D, 1998, 113(1):98-110．
［9］ JEONG J. On the identification of a vortex ［J］. Fluid Mechanics, 1995, 285: 69-94．
［10］ PORTELA L M. Identification and characterization of vortices in the turbulent boundary layer ［D］. Stanford, USA:Stanford University, 1997．
［11］ SADARJOEN I A, POST F H. Geometric methods for vortex extraction ［C］∥IEEE TVCG Symposium on Visualization. Amsterdam, Netherlands:SpringerVerlag, 1999:53-62．
［12］ SADARJOEN I A, POST F H. Detection, quantification and tracking of vortices using streamline geometry ［J］. Compters & Graphics, 2000, 24(3):333-341．
［13］ GONZALEZ R C, WOODS R E. Digital image processing ［M］. Beijing: Publishing House of Electronics Industry, 2007:89-104．
［14］ 陆其明. DirectShow实务精选 ［ M］ . 北京: 科学出版社, 2004:9-141．
［15］ SOBEL I, FELDMAN G. An  isotropic 3×3 gradient operator ［C］. Machine Vision for ThreeDimensional Scenes. NY:Academic Press, 1990: 376-379．
［16］ CANNY J. A computational approach to edge detection ［J］. IEEE Transactions on Pattern Analysis and Machine Intelligence, 1986, 8(6):679-698．
[1] 杨玉婷, 史玉回, 夏顺仁. 基于讨论机制的头脑风暴优化算法[J]. J4, 2013, 47(10): 1705-1711.
[2] 朱晓恩, 郝欣, 夏顺仁. 基于Levy flight的特征选择算法[J]. J4, 2013, 47(4): 638-643.
[3] 周水琴, 应义斌, 商德胜. 基于形态学的香梨褐变核磁共振成像无损检测[J]. J4, 2012, 46(12): 2141-2145.
[4] 孙创日,甄帅,夏顺仁. 基于吸引区域的多模态脑磁共振图像仿射配准[J]. J4, 2012, 46(9): 1722-1728.
[5] 谢迪, 童若锋, 唐敏, 冯阳. 具有高区分度的视频火焰检测方法[J]. J4, 2012, 46(4): 698-704.
[6] 戴渊明, 韦巍, 林亦宁. 基于颜色纹理特征的均值漂移目标跟踪算法[J]. J4, 2012, 46(2): 212-217.
[7] 李启雷, 金文光, 耿卫东. 基于无线惯性传感器的人体动作捕获方法[J]. J4, 2012, 46(2): 280-285.
[8] 刘晨彬,潘颖,张海石,黄峰平,夏顺仁. 基于磁共振图像的脑瘤MGMT表达状况检测算法[J]. J4, 2012, 46(1): 170-176.
[9] 钱诚, 张三元. 适用于目标跟踪的加权增量子空间学习算法[J]. J4, 2011, 45(12): 2240-2246.
[10] 吕谷来, 李建平, 李锵, 俞利兴, 朱松明, 楼建忠, 袁祎琳. 基于机器视觉的砧木定位识别方法[J]. J4, 2011, 45(10): 1766-1770.
[11] 曹颖, 郝欣, 朱晓恩, 夏顺仁. 基于自动随机游走的乳腺肿块分割算法[J]. J4, 2011, 45(10): 1753-1760.
[12] 赖小波,朱世强. 基于互相关信息的非参数变换立体匹配算法[J]. J4, 2011, 45(9): 1636-1642.
[13] 毛锋, 张树有, 施岳定. 多分辨轮廓匹配的成型制件外形检测[J]. J4, 2011, 45(6): 1013-1020.
[14] 王金德, 寿黎但, 李晓燕, 陈刚. 基于多重分割捆绑特征的目标图像检索[J]. J4, 2011, 45(2): 259-266.
[15] 刘建明, 鲁东明, 葛蓉. 基于全局优化的图像修复及其在GPU上实现[J]. J4, 2011, 45(2): 247-252.