Please wait a minute...
J4  2010, Vol. 44 Issue (1): 111-117    DOI: 10.3785/j.issn.1008-973X.2010.01.020
电子、通信与自动控制技术     
高亮度白光LED驱动控制器设计
杨旸,赵梦恋,陆佳颖,李帆,吴晓波
(浙江大学 超大规模集成电路研究所,浙江 杭州 310027)
Controller IC design for high-brightness white LED driver
YANG Yang, ZHAO Meng-lian, LU Jia-ying, LI Fan, WU Xiao-bo
(Institute of VLSI Design, Zhejiang University, Hangzhou 310027, China)
 全文: PDF  HTML
摘要:

针对多种应用条件下高亮度白光LED的驱动要求,提出一种对于不同应用电路拓扑具有广泛适应性的LED驱动控制器芯片.设计采用峰值电流模式控制策略以适应LED的控制特性.针对不同应用拓扑对宽供电电压适应性的要求,引入高精度线性调压器为系统提供稳定的基准电压与工作电压;针对常用的Buck、Boost和Buck-Boost 3种拓扑分别提供灵活的接入端口;为支持不同拓扑下的电流检测,构造一个兼具高端与低端电流检测功能的运算放大器;应用分段线性补偿解决斜率补偿中补偿不足或过补偿的问题.芯片实现了3 000∶1的高调光比,并给出了整个控制器芯片和模块的电路设计.该芯片在1.5 μm BCD(bipolar-CMOS-DMOS)工艺下设计与流片,样片测试的结果与设计目标基本一致,取得了预期的效果.

Abstract:

A LED driver and controller chip was proposed to drive the high-brightness white light-emitting diode (HBWLED) in different applications. The peak current mode control was adopted to adapt for the characteristics of LED. In addition, a precise linear regulator was introduced into the circuitry to offer stable reference and operation voltages for the system, thus guaranteeing the high adaptability for the supply voltage required by different application circuit topologies; flexible interfaces for Buck, Boost and Buck-Boost topologies were provided; an amplifier possesses both high side and low side current sensing functions was designed to support these applications; and a piecewise linear compensation was applied to prevent the under- and over-compensation in constant slope compensation. PWM dimming with high dimming ratio of 3 000∶1 was realized. The controller IC was designed and fabricated in 1.5 μm BCD (bipolar-CMOS-DMOS) process. Test results of samples were consistent with the expectations well.

出版日期: 2010-02-26
:  TN 433  
基金资助:

国家自然科学基金资助项目(90702002).

通讯作者: 赵梦恋,女,讲师,博士后.     E-mail: zhaoml@vlsi.zju.edu.cn
作者简介: 杨旸(1983-),男,浙江杭州人,博士生,主要从事模拟集成电路设计.
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

杨旸, 赵梦恋, 陆佳颖, 等. 高亮度白光LED驱动控制器设计[J]. J4, 2010, 44(1): 111-117.

YANG Yang, DIAO Meng-Lian, LIU Jia-Ying, et al. Controller IC design for high-brightness white LED driver. J4, 2010, 44(1): 111-117.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2010.01.020        http://www.zjujournals.com/eng/CN/Y2010/V44/I1/111

[1] 顾亦磊,吕征宇,钱照明. DC/DC拓扑的分类和选择标准[J]. 浙江大学学报:工学版, 2004, 38(10): 1375-1379.
GU Yi-lei, LV Zheng-yu, QIAN Zhao-ming. DC/DC topology classification and selection criterion [J]. Journal of Zhejiang University: Engineering Science, 2004, 38(10): 1375-1379.
[2] SAUERLANDER G, HENTE D, RADERMACHER H, et al. Driver electronics for LEDs [C]∥ Industry Applications Conference, 2006. 41st IAS Annual Meeting. Tampa: IEEE, 2006: 2621-2626.
[3] REDL R, NOVAK I. Instabilities in current-mode controlled switching voltage regulators [C]∥ IEEE PESC’81. New York: IEEE, 1981: 17-28.
[4] GUPTA V, RINCON-MORA G A, RAHA P. Analysis and design of monolithic, high PSR, linear regulators for SoC applications [C]∥ Proceedings of IEEE International SOC Conference. New York: IEEE, 2004: 311-315.
[5] CHEERY E M. Common-base-input operational amplifiers [J]. IEE Proceedings of Circuits, Devices and Systems, 2005, 152(6): 757-760.
[6] Texas Instruments Incorporated. Modelling, analysis and compensation of the current mode converter [EB/OL]. [2008-01-01]. Unitrode Application Note: 3-44-3-46.http:∥focus.ti.com/lit/an/slua101/slua101.pdf.

[1] 代国定, 陈跃, 杨令, 袁政, 黄冲. 集成式斜波产生与求和电路的设计实现[J]. J4, 2013, 47(1): 83-87.
[2] 代国定,徐洋,李卫敏,黄鹏. 高性能分段温度曲率补偿基准电压源设计[J]. J4, 2010, 44(11): 2142-2147.