Please wait a minute...
Journal of Zhejiang University-SCIENCE B (Biomedicine & Biotechnology)  2013, Vol. 14 Issue (11): 1013-1024    DOI: 10.1631/jzus.B1300034
Articles     
Improvement of enamel bond strengths for conventional and resin-modified glass ionomers: acid-etching vs. conditioning
Ling Zhang, Tian Tang, Zhen-liang Zhang, Bing Liang, Xiao-miao Wang, Bai-ping Fu
Hospital of Stomatology Affiliated to Zhejiang University School of Medicine, Hangzhou 310006, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  Objective: This study deals with the effect of phosphoric acid etching and conditioning on enamel micro-tensile bond strengths (μTBSs) of conventional and resin-modified glass ionomer cements (GICs/RMGICs). Methods: Forty-eight bovine incisors were prepared into rectangular blocks. Highly-polished labial enamel surfaces were either acid-etched, conditioned with liquids of cements, or not further treated (control). Subsequently, two matching pre-treated enamel surfaces were cemented together with one of four cements [two GICs: Fuji I (GC), Ketac Cem Easymix (3M ESPE); two RMGICs: Fuji Plus (GC), RelyX Luting (3M ESPE)] in preparation for μTBS tests. Pre-treated enamel surfaces and cement-enamel interfaces were analyzed by scanning electron microscopy (SEM). Results: Phosphoric acid etching significantly increased the enamel μTBS of GICs/RMGICs. Conditioning with the liquids of the cements produced significantly weaker or equivalent enamel μTBS compared to the control. Regardless of etching, RMGICs yielded stronger enamel μTBS than GICs. A visible hybrid layer was found at certain enamel-cement interfaces of the etched enamels. Conclusions: Phosphoric acid etching significantly increased the enamel μTBSs of GICs/RMGICs. Phosphoric acid etching should be recommended to etch the enamel margins before the cementation of the prostheses such as inlays and onlays, using GICs/RMGICs to improve the bond strengths. RMGICs provided stronger enamel bond strength than GICs and conditioning did not increase enamel bond strength.

Key words: Glass ionomer cements      Surface treatments      Bovine enamels      Scanning electron microscopy (SEM)      Micro-tensile bond strengths     
Received: 29 January 2013      Published: 04 November 2013
CLC:  R783.3  
Cite this article:

Ling Zhang, Tian Tang, Zhen-liang Zhang, Bing Liang, Xiao-miao Wang, Bai-ping Fu. Improvement of enamel bond strengths for conventional and resin-modified glass ionomers: acid-etching vs. conditioning. Journal of Zhejiang University-SCIENCE B (Biomedicine & Biotechnology), 2013, 14(11): 1013-1024.

URL:

http://www.zjujournals.com/xueshu/zjus-b/10.1631/jzus.B1300034     OR     http://www.zjujournals.com/xueshu/zjus-b/Y2013/V14/I11/1013

[1] Mu-zi Li, Jin-rui Wang, Hong Liu, Xia Wang, Kang Gan, Xiu-ju Liu, De-li Niu, Xiao-qing Song. Effects of light curing modes and ethanol-wet bonding on dentin bonding properties[J]. Journal of Zhejiang University-SCIENCE B (Biomedicine & Biotechnology), 2016, 17(9): 703-711.