Please wait a minute...
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2012, Vol. 13 Issue (8): 633-640    DOI: 10.1631/jzus.A1200021
Material Science     
Tribological evaluation of refined, bleached and deodorized palm stearin using four-ball tribotester with different normal loads
Chiong Ing Tiong, Yahya Azli, Mohammed Rafiq Abdul Kadir, Samion Syahrullail
School of Postgraduate Studies, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia; Faculty of Electrical Engineering, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia; Faculty of Biomedical Engineering & Health Science, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia; Faculty of Mechanical Engineering, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor, Malaysia
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  The effects of the mechanical factors with applied loads on the tribological performance of refined, bleached and deodorised (RBD) palm stearin (PS) were studied using a four-ball tribotester. All the RBD PS results were simultaneously compared with the additive-free paraffinic mineral oil (PMO). The experiments were carried out using different loads with a constant speed in order to gain a better understanding of the mechanical processes that occurred during the experiment. For each experiment, the temperature was increased to 75 °C and was run for 1 h. In a mechanical system, lubricant plays an important role in reducing wear and friction. PS exists as a semi-solid at room temperature after the fractionation process from oil palm. Due to the increasing rate of pollution to the environment, vegetable oil was chosen as the test lubricant with regard to its biodegradability. Other advantages of vegetable oil are that it is more easily harvestable and non-toxic compared to petroleum-based oil, which made it a suitable candidate. From the experiment, RBD PS is found to have a better friction constraint reduction compared with additive-free PMO.

Key wordsPalm stearin (PS)      Four-ball tribotester      Paraffinic mineral oil (PMO)      Friction coefficient     
Received: 17 January 2012      Published: 03 August 2012
CLC:  O64  
Cite this article:

Chiong Ing Tiong, Yahya Azli, Mohammed Rafiq Abdul Kadir, Samion Syahrullail. Tribological evaluation of refined, bleached and deodorized palm stearin using four-ball tribotester with different normal loads. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2012, 13(8): 633-640.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.A1200021     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2012/V13/I8/633

[1] Qing He, Hai-jun Xuan, Lian-fang Liao, Wei-rong Hong, Rong-ren Wu. Simulation methodology development for rotating blade containment analysis[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2012, 13(4): 239-259.
[2] Raviraj SHETTY, Raghuvir PAI, Vasanth KAMATH, Shrikanth S. RAO. Steam as coolant and lubricant in turning of metal matrix composites[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2008, 9(9): 1245-1250.