Please wait a minute...
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2011, Vol. 12 Issue (3): 177-182    DOI: 10.1631/jzus.A1000269
Material Science & Chemical Engineering     
Mechanical and electronic properties of diamondlike BC5
Qing Zhang, Shi-ming Wang, Yong-cheng Liang
Xinzhou Teachers University, Xinzhou 034000, Shanxi, China, College of Engineering Science and Technology, Shanghai Ocean University, Shanghai 201306, China, State Key Laboratory of High Performance Ceramics and Superfine Microstructures, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  The structural properties, mechanical behavior, and electronic structure of the newly developed diamondlike BC5 (d-BC5) was investigated using density functional theory (DFT) calculations. The results indicate that d-BC5 has great bulk modulus of 393 GPa, large shear modulus of 398 GPa, and high hardness of 62 Pa, and thus support the fact that d-BC5 is an ultra-incompressible and superhard material. Remarkably, the superhard d-BC5 exhibits metallic features. Furthermore, the trend that the mechanical behavior falls with the increase of boron content was revealed. The combination of huge stiffness, high hardness, and good metallicity makes series of diamondlike BCx (d-BCx) valid for wider applications in comparison with pure diamond.

Key wordsMechanical properties      Metallicity      Diamondlike BC5     
Received: 08 June 2010      Published: 09 March 2011
CLC:  TB303  
Cite this article:

Qing Zhang, Shi-ming Wang, Yong-cheng Liang. Mechanical and electronic properties of diamondlike BC5. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2011, 12(3): 177-182.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.A1000269     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2011/V12/I3/177

[1] Yuan-qing Wang, Xiao-wei Liao, Yuan-yuan Zhang, Yong-jiu Shi. Experimental study on the through-thickness properties of structural steel thick plate and its heat-affected zone at low temperatures[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(3): 217-228.
[2] Jing Xu, David J. Corr, Surendra P. Shah. Nanomechanical properties of C-S-H gel/cement grain interface by using nanoindentation and modulus mapping[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(1): 38-46.
[3] Kah Yen Foong, U. Johnson Alengaram, Mohd Zamin Jumaat, Kim Hung Mo. Enhancement of the mechanical properties of lightweight oil palm shell concrete using rice husk ash and manufactured sand[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(1): 59-69.
[4] Victoria Chifor, Zafer Tekiner, Mehmet Turker, Radu Orban. An experimental investigation of properties of polyethylene reinforced with Al powders[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2011, 12(8): 583-592.
[5] Dan Ye, De-chang Jia, Zhi-hua Yang, Zhen-lin Sun, Peng-fei Zhang. Microstructures and mechanical properties of SiBCNAl ceramics produced by mechanical alloying and subsequent hot pressing[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2010, 11(10): 761-765.
[6] Jing-mei Ma, Feng Ye, Yan-ge Cao, Chun-feng Liu, Hai-jiao Zhang. Microstructure and mechanical properties of liquid phase sintered silicon carbide composites[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2010, 11(10): 766-770.
[7] Jing-yi Zhang, Feng Ye. Effect of agarose content on microstructures and mechanical properties of porous silicon nitride ceramics produced by gelcasting[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2010, 11(10): 771-775.
[8] Ying-li Zhao, Jie Shi, Wen-quan Cao, Mao-qiu Wang, Gang Xie. Effect of direct quenching on microstructure and mechanical properties of medium-carbon Nb-bearing steel[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2010, 11(10): 776-781.
[9] SUJI D., NATESAN S. C., MURUGESAN R.. Experimental study on behaviors of polypropylene fibrous concrete beams[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(7): 1101-1109.
[10] LI Zhuang, WU Di. Effects of finishing rolling temperatures and reduction on the mechanical properties of hot rolled multiphase steel[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(5): 797-804.