Please wait a minute...
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2006, Vol. 7 Issue (11): 14-    DOI: 10.1631/jzus.2006.A1896
    
Removal of PCDDs/Fs from municipal solid waste incineration by entrained-flow adsorption technology
YAN Jian-hua, PENG Zheng, LU Sheng-yong, LI Xiao-dong, CEN Ke-fa
State Key Laboratory of Clean Energy Utilization, Zhejiang University, Hangzhou 310027, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  Entrained flow adsorption using activated carbon as the adsorbent is widely adopted for PCDDs/Fs-abatement in municipal solid waste incineration (MSWI) process. The effects of operating parameters including flue gas temperature, feeding rate of activated carbon, polychlorinated dibenzodioxins and polychlorinated dibenzofurans (PCDDs/Fs) concentration at the inlet of the air pollution control device (APCD), filter materials, pressure drop on PCDDs/Fs removal efficiency are reviewed and commented upon in this paper. Evaluation on the various mechanistic models for entrained flow adsorption is carried out based on the computational simulation in terms of the actual operating condition and theoretical analysis. Finally, an advancement of entrained flow adsorption in combination of dual bag filter is introduced.

Key wordsPCDDs/Fs      Entrained flow adsorption      Operating parameters      Mechanistic model      Dual bag filters     
Received: 25 October 2005     
CLC:  X701.7  
Cite this article:

YAN Jian-hua, PENG Zheng, LU Sheng-yong, LI Xiao-dong, CEN Ke-fa. Removal of PCDDs/Fs from municipal solid waste incineration by entrained-flow adsorption technology. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2006, 7(11): 14-.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.2006.A1896     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2006/V7/I11/14

[1] SUN Zhi-lin, SUN Zhi-feng, DONAHUE John. Equilibrium bed-concentration of nonuniform sediment[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2003, 4(2): 186-194.