Please wait a minute...
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2015, Vol. 16 Issue (5): 335-340    DOI: 10.1631/jzus.A1500093
Special part-issue for selected papers of the 13th CIRP CAT 2014     
Key research on computer aided tolerancing
Yan-long Cao, Luc Mathieu, Jane Jiang
The State Key Laboratory of Fluid Power Transmission and Control, School of Mechanical Engineering, Zhejiang University, Hangzhou 310027, China; LURPA, ENS Cachan, 61 Avenue du Président Wilson, Cachan Cedex, 94235, France; EPSRC Centre for Innovative Manufacturing in Advanced Metrology, University of Huddersfield, Huddersfield, HD1 3DH, UK
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  The CIRP (International Academy for Production Engineering) Conference on Computer Aided Tolerancing (CAT) is initiated and supported scientifically every two years by two CIRP Scientific Technical Committees (STCs): Design (STC Dn) and Precision Metrology (STC P) to address the emerging problems of CAT, which has a prominent role at the interface between product design and manufacturing. The 13th CIRP CAT Conference held at Zhejiang University, Hangzhou, China during May 11–14, 2014 was the successor to the twelve earlier conferences. We are pleased to publish in this special part issue a selection of six papers that were presented at the conference in Hangzhou. These papers cover a wide spectrum of current international research in CAT.

Key wordsComputer aided tolerancing (CAT)      Tolerance specification and standard      Tolerance design      Detection and measurement     
Received: 24 April 2015      Published: 04 May 2015
Cite this article:

Yan-long Cao, Luc Mathieu, Jane Jiang. Key research on computer aided tolerancing. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(5): 335-340.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.A1500093     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2015/V16/I5/335

[1] YE Xue-rong, LIANG Hui-min, ZHAI Guo-fu. Discussion on dynamic reliability tolerance design technology of electromagnetic relay[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(3 ): 17-.
[2] CAO Yan-long, YANG Jiang-xin, WU Zhao-tong, WU Li-qun. A robust tolerance design method based on process capability[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2004, 5(1): 81-85.