Please wait a minute...
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2010, Vol. 11 Issue (8): 545-554    DOI: 10.1631/jzus.A0900619
Civil Engineering     
Experimental study of lightweight aggregate concrete under multiaxial stresses
Han-yong Liu, Yu-pu Song
Structural Engineering Institute, School of Civil Engineering, Faculty of Infrastructure Engineering, Dalian University of Technology, Dalian 116024, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  Lightweight aggregate concrete cube specimens (100 mm×100 mm×100 mm) and plate specimens (100 mm×100 mm×50 mm) were tested under biaxial compression-compression (CC) and compression-tension (CT) load combinations. For comparison, normal concrete plate specimens (100 mm×100 mm×50 mm) were tested under the same load combinations. Based on the test results, a two-level strength criterion of lightweight aggregate concrete in both octahedral stress coordinate and principal stress coordinate was suggested. The lightweight aggregate concrete cube specimens (100 mm×100 mm×100 mm) were then tested under triaxial compression-compression-compression (CCC) load combination with corresponding tests on normal concrete cube specimens (100 mm×100 mm×100 mm). The effect of intermediate principal stress on triaxial compressive strength is further examined. A “plastic flow plateau” area was apparent in principal compressive stress-strain relationships of lightweight aggregate concrete but not in normal concrete. A quadratic formula was suggested for the expression of strength criterion under triaxial compression.

Key wordsLightweight aggregate concrete      Normal concrete      Biaxial loads      Triaxial loads      Compressive strength      Tensile strength      Stress-strain relationships      Plastic flow plateau     
Received: 15 October 2009      Published: 02 August 2010
CLC:  TU5  
Cite this article:

Han-yong Liu, Yu-pu Song. Experimental study of lightweight aggregate concrete under multiaxial stresses. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2010, 11(8): 545-554.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.A0900619     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2010/V11/I8/545

[1] CHEN Kuen-suan, SUNG Wen-pei, SHIH Ming-hsiang. Reliable evaluation method of quality control for compressive strength of concrete[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2005, 6( 8): 8-.