Please wait a minute...
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2010, Vol. 11 Issue (1): 50-60    DOI: 10.1631/jzus.A0800782
Mechanics and Fluids     
Numerical computations of the flow in a finite diverging channel
Zhao-sheng YU, Xue-ming SHAO, Jian-zhong LIN
State Key Laboratory of Fluid Power Transmission and Control, Department of Mechanics, Zhejiang University, Hangzhou 310027, China
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  The flow in a finite diverging channel opening into a large space and resembling the experimental prototype of Putkaradze and Vorobieff (2006) was numerically investigated. The effects of the Reynolds number, initial condition, intersection angle, length of the wedge edges, and the outer boundary condition were examined. The numerical results showed that the flow in the wedge undergoes a change from symmetrical flow to unsymmetrical flow with a weak backflow, then a vortical (circulation) flow and finally an unsteady jet flow as the Reynolds number is increased for an intersection angle of 32( and a wedge edge of length 30 times the width of the inlet slit. For the unsteady flow, the jet attached to one side of the wedge constantly loses stability and rolls up into a mushroom-shaped vortex-pair near the outlet of the wedge. As the intersection angle is increased to 50(, a stable jet flow is observed as a new regime between the vortex and unsteady regimes. Both the intersection angle and the wedge length have negative effects on the stability of the flow, although the effect of the wedge length on the critical Reynolds number for the symmetry-breaking instability is not pronounced. The outer boundary condition was found not to affect the flow patterns inside the wedge significantly. At a certain Re regime above the onset of symmetry-breaking instability, the flows evolve into steady state very slowly except for the initial stage in the case of decreasing flow flux. Two different solutions can be observed within the normal observation time for the experiment, providing a possible explanation for the hysteresis phenomenon in the experiment.

Key wordsDiverging channel      Flow structures      Bifurcation      Fictitious domain     
Received: 11 November 2008      Published: 30 November 2009
CLC:  O35  
Cite this article:

Zhao-sheng YU, Xue-ming SHAO, Jian-zhong LIN. Numerical computations of the flow in a finite diverging channel. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2010, 11(1): 50-60.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.A0800782     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2010/V11/I1/50

[1] Su-deok Shon, Seung-jae Lee, Kang-guk Lee. Characteristics of bifurcation and buckling load of space truss in consideration of initial imperfection and load mode[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2013, 14(3): 206-218.
[2] Wei-guo ZHU, Xiang-zhong BAI. Bifurcation and chaos of a 4-side fixed rectangular thin plate in electromagnetic and mechanical fields[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2009, 10(1): 62-71.
[3] Shao-bu WANG, Quan-yuan JIANG, Yi-jia CAO. WAMS-based monitoring and control of Hopf bifurcations in multi-machine power systems[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2008, 9(6): 840-848.
[4] CHU Yan-dong, LI Xian-feng, ZHANG Jian-gang, CHANG Ying-xiang. Nonlinear dynamics analysis of a new autonomous chaotic system[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(9): 1408-1413.
[5] PAN Tsorng-Whay, GLOWINSKI Roland, JOSEPH Daniel D.. Simulating the dynamics of fluid-cylinder interactions[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2005, 6( 2): 4-.
[6] SHAO Xue-ming, LIN Jian-zhong, YU Zhao-sheng. Sedimentation of a single particle between two parallel walls[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2004, 5(1): 111-116.