Please wait a minute...
Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering)  2002, Vol. 3 Issue (1): 13-18    DOI: 10.1631/jzus.2002.0013
Mechanics & Civil Engineering     
Stress field near an interface edge of linear hardening materials
XU Jin-quan, FU Lie-dong
Department of Mechanics, Zhejiang University, Hangzhou, China, 310027
Download:     PDF (0 KB)     
Export: BibTeX | EndNote (RIS)      

Abstract  The elastic-plastic singular stress field near an interface edge of bounded linear hardening material is substantially as same as that of bonded elastic materials whose Young\'s modulus and Poisson ratio are substituted by equivalent values, respectively. Further investigation by the elasto-plastic boundary element method (BEM) on the stress field near the interface edge showed that the stress field there can be divided into three regions: the domain region of the elastic-plastic singular stress field, the transitional region and the elastic region. The domain region of the elastic-plastic singular stress becomes larger with the increasing of the linear hardening coefficient. When the linear hardening coefficient decreases to a certain value, the effective stress in most of the yield zone equals approximately the yield stress. The stress distribution in the elastic region under small-scale yielding condition was also investigated.

Key wordsinterface edge      elastoplasticity      linear hardening      singularity      boundary element method     
Received: 18 January 2001     
CLC:  TB125  
  O344.3  
Cite this article:

XU Jin-quan, FU Lie-dong. Stress field near an interface edge of linear hardening materials. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2002, 3(1): 13-18.

URL:

http://www.zjujournals.com/xueshu/zjus-a/10.1631/jzus.2002.0013     OR     http://www.zjujournals.com/xueshu/zjus-a/Y2002/V3/I1/13

[1] Chao-bang Yao, Wen-cai Dong. Modeling of fluid resonance in-between two floating structures in close proximity[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2015, 16(12): 987-1000.
[2] Devi Chandra, Judha Purbolaksono, Yusoff Nukman, Haw-ling Liew, Singh Ramesh, Mohsen-abdel Hassan. Fatigue growth of a surface crack in a V-shaped notched round bar under cyclic tension[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2014, 15(11): 873-882.
[3] De-ren Gong, Xiao-wei Shao, Wei Li, Deng-ping Duan. Optimal linear attitude estimators via geometric analysis[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2011, 12(11): 873-882.
[4] Yu-tong LI, Yu-xin WANG, Shuang-xia PAN, Rui-qin GUO. Traversing the singularity hypersurface by applying the input disturbances to 6-SPS parallel manipulator[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2008, 9(11): 1539-1551.
[5] CAO Juan, WANG Guo-zhao. Relation among C-curve characterization diagrams[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2007, 8(10): 1663-1670.
[6] Ren Xiao-qiang, Chen Wu-jun, Dong Shi-lin, Wang Feng. Neural network method for solving elastoplastic finite element problems[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2006, 7(3 ): 17-.
[7] HAO Zhi-yong, JIA Wei-xin, FANG Fang. Virtual design and performance prediction of a silencing air cleaner used in an I.C. engine intake system[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2005, 6(10): 17-.
[8] CHEN Song-ying, WANG Le-qin, JIAO Lei. Novel boundary element method for resolving plate bending problems[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2003, 4(5): 584-590.
[9] WANG Xiao-gui, XU Jin-quan. EDGE SINGULARITY OF BONDED PIEZOELECTRIC MATERIALS WITH REPEATED EIGENVALUES[J]. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 2001, 2(2): 157-160.