Please wait a minute...
Front. Inform. Technol. Electron. Eng.  2011, Vol. 12 Issue (2): 124-131    DOI: 10.1631/jzus.C0910795
    
Moments and Pasek’s methods for parameter identification of a DC motor
Mounir Hadef*, Mohamed-Rachid Mekideche
Université de Jijel, Laboratoire LAMEL, B.P. 98, Ouled Aissa, 18000 Jijel, Algérie
Moments and Pasek’s methods for parameter identification of a DC motor
Mounir Hadef*, Mohamed-Rachid Mekideche
Université de Jijel, Laboratoire LAMEL, B.P. 98, Ouled Aissa, 18000 Jijel, Algérie
 全文: PDF(562 KB)  
摘要: Time moments have been introduced in automatic control because of the analogy between the impulse response of a linear system and a probability function. Pasek described a testing procedure for determining the DC parameters from the current response to a step in the armature voltage motor. In this paper, two identification algorithms developed based on the moments and Pasek’s methods are introduced and applied to the parameter identification of a DC motor. The simulation and experimental results are presented and compared, showing that the moments method makes the model closer to reality, especially in a transient regime.
关键词: IdentificationMoments methodPasek’s identification methodSeparately excited DC motor    
Abstract: Time moments have been introduced in automatic control because of the analogy between the impulse response of a linear system and a probability function. Pasek described a testing procedure for determining the DC parameters from the current response to a step in the armature voltage motor. In this paper, two identification algorithms developed based on the moments and Pasek’s methods are introduced and applied to the parameter identification of a DC motor. The simulation and experimental results are presented and compared, showing that the moments method makes the model closer to reality, especially in a transient regime.
Key words: Identification    Moments method    Pasek’s identification method    Separately excited DC motor
收稿日期: 2009-12-26 出版日期: 2011-02-08
CLC:  TM33  
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  
Mounir Hadef
Mohamed-Rachid Mekideche

引用本文:

Mounir Hadef, Mohamed-Rachid Mekideche. Moments and Pasek’s methods for parameter identification of a DC motor. Front. Inform. Technol. Electron. Eng., 2011, 12(2): 124-131.

链接本文:

http://www.zjujournals.com/xueshu/fitee/CN/10.1631/jzus.C0910795        http://www.zjujournals.com/xueshu/fitee/CN/Y2011/V12/I2/124

[1] Jiong FU, Xue-shan LUO, Ai-min LUO, Jun-xian LIU. Enterprise-level business component identification in business architecture integration[J]. Front. Inform. Technol. Electron. Eng., 2017, 18(9): 1320-1335.
[2] You LIU , Qing SHEN , Dong-li MA , Xiang-jiang YUAN. Steering control for underwater gliders[J]. Front. Inform. Technol. Electron. Eng., 2017, 18(7): 898-914.
[3] Xiong-bin PENG, Guo-fang GONG, Hua-yong YANG, Hai-yang LOU, Wei-qiang WU, Tong LIU. Quantitative feedback controller design and test for an electro-hydraulic position control system in a large-scale reflecting telescope[J]. Front. Inform. Technol. Electron. Eng., 2017, 18(10): 1624-1634.
[4] Hong SONG, Jia-heng ZHANG, Ping YANG, Hao-cai HUANG, Shu-yue ZHAN, Teng-jun LIU, Yi-lu GUO, Hang-zhou WANG, Hui HUANG, Quan-quan MU, Mei-fen FANG, Ming-yuan YANG. Modeling of a dynamic dual-input dual-output fast steering mirror system[J]. Front. Inform. Technol. Electron. Eng., 2017, 18(10): 1488-1498.
[5] Hasan Abbasi Nozari, Hamed Dehghan Banadaki, Mohammad Mokhtare, Somayeh Hekmati Vahed. Intelligent non-linear modelling of an industrial winding process using recurrent local linear neuro-fuzzy networks[J]. Front. Inform. Technol. Electron. Eng., 2012, 13(6): 403-412.
[6] Zhen-gong Cai, Xiao-hu Yang, Xin-yu Wang, Aleksander J. Kavs. A fuzzy formal concept analysis based approach for business component identification[J]. Front. Inform. Technol. Electron. Eng., 2011, 12(9): 707-720.
[7] Jian Niu, Zu-hua Xu, Jun Zhao, Zhi-jiang Shao, Ji-xin Qian. Model predictive control with an on-line identification model of a supply chain unit[J]. Front. Inform. Technol. Electron. Eng., 2010, 11(5): 394-400.