Please wait a minute...
浙江大学学报（理学版）
浙江大学学报（理学版）  2018, Vol. 45 Issue (1): 44-53    DOI: 10.3785/j.issn.1008-9497.2018.01.008
数学与计算机科学     
保形分段三次多项式曲线的形状分析
严兰兰, 樊继秋
东华理工大学 理学院, 江西 南昌 330013
Construction and analysis of a new class of shape-preserving piecewise cubic polynomial curves
YAN Lanlan, FAN Jiqiu
College of Science, East China University of Technology, Nanchang 330013, China
 全文: PDF(2075 KB)   HTML  
摘要： 构造了一种保形并且形状可调的分段三次多项式曲线，并分析其形状特征与控制多边形之间的关系.首先，通过预设基函数的性质再解方程组，构造了一组带2个形状参数的多项式基函数，其包含三次均匀B样条基函数作为特例.然后，借助基函数与三次Bernstein基函数之间的关系证明了基函数的全正性，由这组基函数定义了一种分段三次多项式曲线，使该曲线拥有一个局部和一个全局形状参数.最后，分析了控制多边形边变量之间的相对位置关系对曲线段形状特征的影响，得到了曲线段拥有1个或2个拐点，1个二重点或1个尖点，为局部凸或全局凸时的充要条件.该结论为曲线段的形状调整提供了理论基础.
关键词： 曲线设计;  B样条方法;  全正基;  形状参数;  形状分析    
Abstract: This paper proposes a new class of shape-preserving piecewise cubic polynomial curves with both local and global shape control parameters. By presetting the properties of its basis functions and then solving equations, a set of polynomial basis functions with two shape parameters are derived, including the cubic uniform B-spline basis functions as a special case. Based on the relationship between the new basis functions and the cubic Bernstein basis functions, the totally positive property of the new basis functions is proved and a new class of piecewise cubic polynomial curves is therefore defined. The effect of the relative position of the control polygons' side vectors onto the shape characteristic of the corresponding curve segments is analyzed. Necessary and sufficient conditions are obtained for the curve segments containing single or double inflection points, a loop or a cusp, or be locally or globally convex, which provide a theoretical guide for adjusting the shape of curve segments.
Key words: curve design    B-spline method    totally positive basis    shape parameter    shape analysis
收稿日期: 2016-04-05 出版日期: 2017-12-15
CLC:  TP391  
基金资助: Supported by the NSFC(11261003, 11761008), the Natural Science Foundation of Jiangxi Province (20161BAB211028) and the Science Research Foundation of Jiangxi Province Education Department (GJJ160558).
作者简介: YAN Lanlan(1982-),ORCID:http://orcid.org/0000-0002-5472-9986,female,Ph.D,associate professor,the field of interest is CAGD,E-mail:yxh821011@aliyun.com.
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　
严兰兰
樊继秋

引用本文:

严兰兰, 樊继秋. 保形分段三次多项式曲线的形状分析[J]. 浙江大学学报（理学版）, 2018, 45(1): 44-53.

YAN Lanlan, FAN Jiqiu. Construction and analysis of a new class of shape-preserving piecewise cubic polynomial curves. Journal of ZheJIang University(Science Edition), 2018, 45(1): 44-53.

链接本文:

https://www.zjujournals.com/sci/CN/10.3785/j.issn.1008-9497.2018.01.008    或    https://www.zjujournals.com/sci/CN/Y2018/V45/I1/44

[1] FARIN G. Curves and Surfaces for Computer Aided Geometric Design[M]. San Diego:Academic Press,1993.
[2] XU G, WANG G Z. Extended cubic uniform B-spline and α-B-spline[J]. Acta Automatica Sinica,2008,34(8):980-984.
[3] COSTANTINI P, KAKLIS P D, MANNI C. Polynomial cubic splines with tension properties[J]. Computer Aided Geometric Design,2010,27(8):592-610.
[4] HAN X L. Piecewise quartic polynomial curves with a local shape parameter[J]. Journal of Computational and Applied Mathematics,2006,195(1-2):34-45.
[5] HAN X L. A class of general quartic spline curves with shape parameters[J]. Computer Aided Geometric Design,2011,28(3):151-163.
[6] HU G, QIN X Q, JI X M, et al. The construction of λμ-B-spline curves and its application to rotational surfaces[J]. Applied Mathematics and Computation,2015,266(C):194-211.
[7] ZHU Y P, HAN X L, LIU S J. Curve construction based on four αβ-Bernstein-like basis functions[J].Journal of Computational and Applied Mathematics,2015,273(1):160-181.
[8] HAN X L, HUANG X L, MA Y C. Shape analysis of cubic trigonometric Bezier curves with a shape parameter[J]. Applied Mathematics and Computation,2010,217(6):2527-2533.
[9] MONTERDE J. Singularities of rational Bezier curve[J]. Computer Aided Geometric Design,2001,18(8):805-816.
[10] YANG Q M, WANG G Z. Inflection points and singularities on C-curves[J]. Computer Aided Geometric Design,2004,21(2):207-213.
[11] JUHÁSZ I. On the singularity of a class of parametric curves[J]. Computer Aided Geometric Design,2006,23(2):146-156.
[12] LIU C Y. Theory and Application of Convex Curves and Surfaces in CAGD[D]. Enschede:University of Twente,2001.
[13] YAN L L, YING Z W. Adjustable curves and surfaces with simple G3 conditions[J]. Journal of Zhejiang University:Science Edition,2016,43(1):87-96.
[1] 孔翔,陈军. 一类带4个形状参数的同次三角曲面构造算法[J]. 浙江大学学报（理学版）, 2023, 50(2): 153-159.
[2] 王海波, 杨当福, 佘卫勤, 刘圣军, 刘新儒, 陈月安, 白燕羽. 带2个形状参数的多项式可展曲面造型[J]. 浙江大学学报（理学版）, 2021, 48(2): 131-142.
[3] 徐晓岭, 顾蓓青, 王蓉华. 两参数拉普拉斯BS疲劳寿命分布的统计分析[J]. 浙江大学学报（理学版）, 2020, 47(6): 691-704.
[4] 张迪, 查东东, 刘华勇. 三次DP曲线定义区间的扩展及其形状优化[J]. 浙江大学学报（理学版）, 2020, 47(2): 178-190.
[5] 徐晓岭, 王蓉华, 顾蓓青. 全样本场合下两参数Birnbaum-Saunders疲劳寿命分布的统计分析[J]. 浙江大学学报（理学版）, 2017, 44(6): 692-704.
[6] 李军成, 宋来忠. 利用带形状参数的有理势函数构造基于Metaball的过渡曲线[J]. 浙江大学学报（理学版）, 2017, 44(3): 307-313.
[7] 严兰兰， 应正卫. 具有简单G3条件的可调曲线曲面[J]. 浙江大学学报（理学版）, 2016, 43(1): 87-96.