Please wait a minute...
J4  2014, Vol. 48 Issue (3): 0-07    DOI: 10.3785/j.issn.1008-973X.2014.10.000
    
Microstructure and modification mechanism of polyacrylate latex modified mortars
LI Bei1, TIAN Ye1, ZHAO Ruo-yi2, DUAN An1, LI Zong-jin3, MA Hong-yan3
1. Department of Civil Engineering and Architecture, Zhejiang University, Hangzhou 310058, China; 2. Art Design College, Zhejiang Gongshang Unniversity, Hangzhou 310018, China; 3. Department of Civil and Environmental Engineering, Hong Kong University of Science and Technology, Hong Kong, China
Download:   PDF(3188KB) HTML
Export: BibTeX | EndNote (RIS)      

Abstract  

In order to study the microstructure forming process and modification mechanism of polyacrylate (PA) latex modified mortars during the hardening process, the adsorption performance of PA latex in fresh mortars was analyzed, and the interaction between PA latex and pore solution was simulated. Meanwhile, the microstructure evolution of PA modified mortars was measured by Scanning Electron Microscope (SEM) and Energy Dispersive X-ray Detector (EDX) analysis. The test results show that PA particles chemically react with calcium ions in the pore solution and PA polymer is localized at some places within cement mortar through different morphologies. Based on these experiments, in considering the reactions between PA latex and cement-based materials, an improved polymer modification and microstructure formation model is proposed. This is of great importance for the investigation on the mechanical properties of polymer modified cement-based materials and the application of polymer modified cement-based materials in civil engineering.



Published: 10 June 2018
CLC:  TU 411  
  TU 472  
Cite this article:

LI Bei, TIAN Ye, ZHAO Ruo-yi, DUAN An, LI Zong-jin, MA Hong-yan. Microstructure and modification mechanism of polyacrylate latex modified mortars. J4, 2014, 48(3): 0-07.

URL:

http://www.zjujournals.com/eng/10.3785/j.issn.1008-973X.2014.10.000     OR     http://www.zjujournals.com/eng/Y2014/V48/I3/0


聚丙烯酸酯乳液改性砂浆微观结构与改性机理

为了研究聚丙烯酸酯乳液(PA)改性砂浆硬化过程中微观结构的形成过程及改性机理,分析PA聚合物乳液在新拌水泥砂浆中的吸附特性,并模拟孔隙溶液和PA乳液之间相互作用.同时采用扫描电子显微镜(SEM)和能谱分析(EDX)法表征了PA改性砂浆微观结构的演化过程.试验结果表明,PA颗粒将与孔隙溶液中的钙离子发生化学反应,PA聚合物将以不同的形态吸附在水泥砂浆的局部部位.在此基础上,考虑PA聚合物改性乳液与水泥基材料的反应,提出一种改进的聚合物改性与微观结构形成模型.这对研究聚合物改性水泥基材料的力学性能与推广聚合物改性水泥基材料在工程中的应用具有重要意义.

[1] SUJJAVANICH S, LUNDY J R. Development of strength and fracture properties of styrene-butadiene copolymer latex-modified concrete [J]. ACI Materials Journal, 1998, 95(2): 131-143.

[2] SAKAI E, SUGITA J. Composite mechanism of polymer modified cement [J]. Cement and Concrete Research, 1995, 25(1): 127-135.

[3] SU Z, SUJATA K, BIJEN J M J M, et al. The evolution of the microstructure in styrene acrylate polymermodified cement pastes at the early stage of cement hydration [J]. Advanced Cement Based Materials, 1996, 3(3/4): 87-93.

[4] AFRIDI M U K, OHAMA Y, DEMURA K, et al. Development of polymer films by the coalescence of polymer particles in powdered and aqueous polymer-modified mortars [J]. Cement and Concrete Research, 2003, 33(11): 1715-1721.

[5] OHAMA Y. Handbook of polymer-modified concrete and mortars-properties and process technology[M]. Park Ridge, USA: Noyes publications, 1995: 11-21.

[6] BEELDENS A, GEMERT D V, SCHORN H, et al. From microstructure to macrostructure: an integrated model of structure formation in polymer-modified concrete [J]. Materials and Structures, 2005, 38(6): 601-607.

[7] GEMERT D V, CZARNECKI L, MAULTZSCH M, et al. Cement concrete and concrete-polymer composites: two merging worlds [J]. Cement and Concrete Composites, 2005, 27(9): 926-933.

[8] WANG Ru, WANG Pei-ming, LI Xin-gui. Physical and mechanical properties of styrene-butadiene rubber emulsion modified cement mortars [J]. Cement and Concrete Research, 2005, 35(5): 900-906.

[9] PLANK J, GRETZ M. Study on the interaction between anionic and cationic latex particles and Portland Cement [J]. Colloids and Surfaces A: Physicochemical Engineering Aspects, 2008, 330(2/3): 227-233.

[10] TIAN Ye, JIN Xian-yu, JIN Nan-guo, et al. Research on the microstructure formation of polyacrylate latex modified mortars [J].Construction and Building Materials, 2013, 47(10):1381-1394.

[11] MA Hong-yan, TIAN Ye, LI Zong-jin. Interactions between organic and inorganic phases in PA-and PU/PA-modified-cement-based materials [J]. Journal of Materials in Civil Engineering,2011,23(10): 1412-1421.

[12] MA Hong-yan, LI Zong-jin. Microstructures and mechanical properties of polymer modified mortars under different mechanisms [J]. Construction and Building Materials, 2013, 47(5), 579-587.

[13] ATAHAN H N, CARLOS C, CHAE S, et al. The morphology of entrained air voids in hardened cement paste generated with different anionic surfactants [J]. Cement and Concrete Composites,2008,30(7): 566-575.

[14] BONAPASTA A A, BUDA F, COLOMBET P. Interaction between Ca Ions and poly(acrylic acid) chains in macro-defect-free cements: a theoretical study [J]. Chemistry of Materials,2001,13(1): 64-70.

[15] BONAPASTA A A, BUDA F, COLOMBET P, et al. Cross-linking of poly(vinyl alcohol) chains by Ca ions in macro-defect-free cements [J].Chemistry of materials,2002, 14(3): 1016-1022.

[16] MATSUYAMA H, YOUNG J F. Synthesis of calcium silicate hydrate/polymer complexes: Part I. Anionic and nonionic polymers [J].Journal of Materials Research,1999, 14 (8): 3379-3388.

[17] OHAMA Y. Polymer-based admixture [J]. Cement and Concrete Composites,1998,20(2/3):189-212.

[1] LIU Chang-dian, SUN Hong-yue, KANG Jian-wei, Du Li-li. Experimental investigation of seepage barrier effect by air-inflation in soil[J]. J4, 2014, 48(2): 236-241.
[2] KE Han,WANG Wen-fang, WEI Chang-chun, CHEN Yun-min, ZHAN Liang-tong. Experimental study on saturated hydraulic conductivity of MSW under different conditions[J]. J4, 2013, 47(7): 1164-1170.
[3] YU Zhao-sheng, WANG Yu, SHAO Xue-ming,WU Teng-hu. Numerical studies on effects of neutrally buoyant large particles
on turbulent channel flow
[J]. J4, 2013, 47(1): 109-115.
[4] WANG Lin-tao, GONG Guo-fang, SHI Hu, LIU Huai-yin. Ground surface deformation control based on chamber
pressure direct feedback
[J]. J4, 2012, 46(7): 1182-1188.
[5] LIU Yong-li, SUN Hong-yue, YU Yang, ZHAN Wei,SHANG Yue-quan. Determining landslide thrust on anti-sliding pile by
BOTDR monitoring technology
[J]. J4, 2012, 46(5): 798-803.
[6] LIN Wei, LOU Wen-juan, SHENTU Tuan-bing, HUANG Ming-feng. Peak factor of non-Gaussian pressure process on complex
super-tall building
[J]. J4, 2012, 46(4): 691-697.
[7] LIU Yong-li, SUN Hong-yue, YU Yang, ZHAN Wei, SHANG Yue-quan. BOTDR monitoring analysis of anti-sliding pile internal force[J]. J4, 2012, 46(2): 243-249.
[8] XU Ri-qing, ZHANG Jun, ZHU Jian-feng, WANG Xing-chen. Modified Duncan-Chang model considering disturbance[J]. J4, 2012, 46(1): 1-7.
[9] ZHOU Jian, ZHENG Hong-bin, WEN Xiao-gui, GUAN Lin-bo, DENG Yi-liang. Deformation of intact soft clay under principal stress rotation
with effect of intermediate principal stress
[J]. J4, 2011, 45(12): 2134-2141.
[10] XUE Wen, JIN Wei-liang, YOKOTA Hiroshi. Chloride penetrating under co-effects of initial curing and
exposure conditions
[J]. J4, 2011, 45(8): 1416-1422.
[11] CHEN Gui-feng, MA Xiao-wei, WU Jian-hai, MA Qiao-yun, XUE Jing-jing, HAO Qiu-yan. Effect of rapid thermal process on oxygen precipitates behavior in
silicon irradiated by high energy particles
[J]. J4, 2011, 45(5): 928-933.
[12] CHEN Guo-hong, XIE Kang-he, CHENG Yong-feng, XU Yan. Analytical solution for consolidation of sand-drained ground considering
variation of permeability coefficient in smeared zone
[J]. J4, 2011, 45(4): 665-670.
[13] WANG Yan, LI Hai-feng, XU Xi-ping. The light-pipe illumination system design for double-lamp projector[J]. J4, 2011, 45(2): 382-386.
[14] SHI Hu, GONG Guo-fang, YANG Hua-yong, WANG Hui. Determination of thrust force for shield tunneling machine[J]. J4, 2011, 45(1): 126-131.
[15] SU Feng, JIANG Ye, CA Yong-Chang. Finite element analysis of steel beam and concretefilled circular column joints bearing capacity[J]. J4, 2010, 44(10): 1876-1882.