Please wait a minute...
J4  2010, Vol. 44 Issue (11): 2130-2136    DOI: 10.3785/j.issn.1008973X.2010.11.015
电气工程     
离线式开关电源控制器芯片的设计与实现
苑婷,何乐年,柯徐刚
浙江大学 超大规模集成电路研究所,浙江 杭州 310027
Design and implementation of off-line switching power-supply controller
YUAN Ting, HE Le-nian, KE Xu-gang
Institute of VLSI Design, Zhejiang University, Hangzhou 310027, China
 全文: PDF  HTML
摘要:

 为了提高离线式开关电源的性能,提出一种的高效率、低功耗的离线式开关电源控制器芯片的设计方法.该控制器是基于脉宽调制(PWM)模式和脉冲间隙调制(PSM)模式方式设计.控制器环路控制方式采用峰值电流控制.在反馈电压小于4.75 V时采用PWM工作模式,在反馈电压大于4.75 V时采用脉冲间歇调制模式控制.另外,电路还具有短路保护、过压保护、欠压保护、内部电流斜率补偿、电流采样死区控制的功能.为了降低系统的电磁干扰(EMI),芯片在一定的频率范围(1 kHz)内随机改变脉冲频率,以拓宽频谱.芯片采用TSMC 0.6 μm 高压40 V BCD工艺模型实现.仿真结果表明,该电路可实现两个工作模式及相互之间的平稳过渡,适用于大范围交流输入(85~264 V)的锂电池充电器或电源适配器.

Abstract:

A design method of an offline switching power-supply controller with properties of highefficiency and lowpower is presented to improve performances of offline power supplies. The controller was designed on basis of pulse-width modulation (PWM) mode and pulse skipping modulation (PSM) mode. The design method of the controller loop is based on the peak current mode. The controller operates in PWM mode, when the feedback voltage is less than 4.75 V, and works in PSM mode otherwise, ensuring high efficiency. Additional functions, such as shortcircuit protection, over-voltage protection, under-voltage lockout, internal slope compensation, leading-edge blanking on current sense are included. For reducing the electromagnetic interference (EMI), the switching frequency is designed to be randomized within the range of 1 kHz at around centre frequency to flatten the power spectral density (PSD). The chip was implemented by using TSMC's 0.6 μm 40 V high voltage BCD process. Simulation results indicate that the controller realizes the required working modes and performs seamless switching between the modes. The controller can be applied to Li-Ion battery charger with a wide range of AC input (85~264 V) or power adapter.

出版日期: 2010-12-23
:     
基金资助:

 浙江省科技计划项目资助(2007C21021).

通讯作者: 何乐年,男,教授,博导.     E-mail: helenian@vlsi.zju.edu.cn
作者简介: 苑婷(1986-),女,山东济南人,硕士生,从事模拟及数模混合集成电路设计研究.E-mail: yuanting@vlsi.zju.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

苑婷,何乐年,柯徐刚. 离线式开关电源控制器芯片的设计与实现[J]. J4, 2010, 44(11): 2130-2136.

YUAN Ting, HE Le-nian, KE Xu-gang. Design and implementation of off-line switching power-supply controller. J4, 2010, 44(11): 2130-2136.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008973X.2010.11.015        http://www.zjujournals.com/eng/CN/Y2010/V44/I11/2130

[1]李秀哲.简化离线式开关电源的设计[J].今日电子2002, (11): 26-29.
LI Xiuzhe. Using FET to simplify switch power design [J]. Electronic products China, 2002(11): 26-29.
[2]BARRY A, ROBERT E, DRAGAN M. DCDC converter design for batteryoperated system [C]∥Power Electronics Specialists Conference. Atlanta: International Association of Engineers, 1995:103-105.
[3]王菁,梁斌,胡清淙等. 高效率、低功耗直流电压转换器芯片的设计与实现[J]. 江南大学学报:自然科学版,2008,7(3): 281-286.
WANG Jing, LIANG Bin, HU Qingcong, et al. Design and IC implementation of high efficiency and low power DCDC converter [J]. Journal of Jiangnan University :Natural Science Edition, 2008, 7(3):281-286.
[4] SAHU B, RINCONMORA G A. A highefficiency, dual mode, dynamic, buckboost power supply IC for portable applications[C]∥VLSI Design, 2005. 18th International Conference.Washington. DC: IEEE Computer Society, 2005: 858-861.
[5] XIAO J X, PETERCHEV A V, ZHANG J H, et al. A 4uA quiescentcurrent dualmode digitally controlled buck converter IC for cellular phone applications [J]. IEEE Journal of Solidstate Circuits, 2004, 39(12): 2342-2348.
[6]SAHU B, RINCONMORA G A. An accurate, lowvoltage, CMOS switching power supply with adaptive ontime pulsefrequency modulation (PFM) control [J]. IEEE Transaction of Circuit and Systems, 2007, 54(2): 312-321.
[7]刘帘曦,杨银堂,朱樟明. 一种PWM/伪PFM双模调制的降压型DC/DC开关电源[J]. 半导体学报,2008, 29(10):1956-1962.
LIU Lianxi, YANG Yintang, ZHU Zhangming. A PWM/PseudoPFM automodeapplied Buck DC/DC switching regulator [J]. Journal of Semiconductors, 2008, 29(10): 1956-1962.
[8]周正,王世山. 频率抖动技术抑制变换器电磁干扰分析[J]. 通信电源技术,2008, 25(1):4-6.
ZHOU Zheng, WANG Shishan. EMI reduction of the converter based on frequency jittering [J].Telecom Power Technologies, 2008, 25(1):4-6.
[9] TSE K K, CHUNG H S H, HUI S Y R, et al. Spectral characteristics of random carrier frequency switching in offline switched mode power supply [C]∥IEEE Applied Power Electronics Conference and Exposition.Dallas:  International Association of Engineers 1999:139-145.
[10] KUISMA M. Variable frequency switching in power supply EMIcontrol: an overview [J]. Aerospace and Electronic Systems Magazine, 2003, 18(12): 18-22.

[1] 宁志华,何乐年,胡志成. 一种高压高可靠性开关电源控制芯片[J]. J4, 2014, 48(3): 377-383.
[2] 李林,陈家旺,顾临怡,王峰. 轴向柱塞泵/马达变量阀配流机构[J]. J4, 2014, 48(1): 29-34.
[3] 陈钊,余锋,陈婷婷. 基于日志结构的闪存均衡回收策略[J]. J4, 2014, 48(1): 92-99.
[4] 蒋湛,姚晓明,林兰芬. 基于特征自适应的本体映射方法[J]. J4, 2014, 48(1): 76-84.
[5] 陈迪仕 ,张宇,李平. 微小型无人直升机地面效应建模[J]. J4, 2014, 48(1): 154-160.
[6] 霍新新,褚金奎,韩冰峰,姚斐.  基于多个压电换能器的接口电路[J]. J4, 2013, 47(11): 2038-2045.
[7] 杨鑫,许端清,杨冰. 基于不规则性的并行计算方法[J]. J4, 2013, 47(11): 2057-2064.
[8] 王玉强,张宽地,陈晓东. 胶黏钢-混凝土组合梁的界面行为数值分析[J]. J4, 2013, 47(9): 1593-1598.
[9] 崔何亮, 张丹, 施斌.  布里渊分布式传感的空间分辨率及标定方法[J]. J4, 2013, 47(7): 1232-1237.
[10] 彭勇,徐小剑. 集料分布对沥青混合料劈裂强度影响数值分析[J]. J4, 2013, 47(7): 1186-1191.
[11] 伍晓榕,裘乐淼,张树有,孙良峰,郭传龙. 模糊语境下的复杂系统关联FMEA方法[J]. J4, 2013, 47(5): 782-789.
[12] 金波,陈诚,李伟. 具有半球形足端的六足机器人步态修正算法[J]. J4, 2013, 47(5): 768-774.
[13] 钟世英, 吴晓君, 蔡武军, 凌道盛, 蒋祝金, 王顺玉. 月面软着陆足垫水平拖曳模型试验装置研制[J]. J4, 2013, 47(3): 465-471.
[14] 袁幸,朱永生,张优云,洪军,祁文昌. 基于正反问题的滚动轴承损伤程度评估[J]. J4, 2012, 46(11): 1960-1967.
[15] 杨飞,朱株,龚小谨,刘济林. 基于三维激光雷达的动态障碍实时检测与跟踪[J]. J4, 2012, 46(9): 1565-1571.