Please wait a minute...
浙江大学学报(工学版)
土木工程     
转向系统传递函数的研究及理想传动比获取
程准,鲁植雄,龚佳慧,刁秀永
南京农业大学 工学院,江苏 南京 210031
Transfer function of steering system and acquisition method of ideal steering ratio
CHENG Zhun,LU Zhi xiong,GONG Jia hui,DIAO Xiu yong
College of Engineering, Nanjing Agricultural University, Nanjing 210031, China
 全文: PDF(1685 KB)   HTML
摘要:

基于对新建立的6自由度非线性转向模型的研究,提出采用传递函数代替原转向模型的方法,提出求解传递函数的新方法.利用改进的模拟退火算法求解传递函数,采用不同的插值法建立传递函数的动态参数变化模型,对不同的插值法进行比较.基于得到的转向传递函数模型,针对现阶段获取理想传动比方式的缺陷,提出稳态增益理想传动比动态精确获取方法.研究结果表明,转向传递函数输出的响应曲线与原系统的响应曲线非常吻合,精度极高,该传递函数能够替代原先复杂的系统|动态参数变化模型能够很好地表征传递函数的参数随车速、传动比和转向盘转角的变化关系;理想传动比的动态精确获取能够实时保证在车速和方向盘不断变化下转向增益维持理想的定值.

Abstract:

The transfer function was used instead of the original steering model based on the new nonlinear steering model of six DOFs. A new method was proposed to solve the transfer function. The improved simulated annealing algorithm was used to solve the transfer function. Then different interpolation methods were used to establish the transfer function parameters’ model of dynamic change. Different interpolation methods were compared with the results. A new method for obtaining the ideal steering ratio was proposed based on the model of the steering transfer function in order to overcome the shortcomings of the current methods. Results showed that the response curve of the steering transfer function accorded with the response curve of the original system, and the transfer function can replace the original complex system. Dynamic change parameter model can characterize the relationship between the parameters of the transfer function with the speed, transmission ratio and steering wheel angle. Dynamic accurate acquisition of ideal steering ratio can guarantee the constant change in the speed and steering wheel to maintain the desired value of the steering gain.

出版日期: 2016-07-23
:  U 463  
基金资助:

江苏省科技支撑计划资金资助项目(BE2012384);江苏省科技成果转化专项资金资助项目(BA2010055).

通讯作者: 鲁植雄,男,教授.ORCID:0000-0002-1687-4058.     E-mail: luzx@njau.edu.cn
作者简介: 程准(1992-),男,硕士生,从事车辆动力学分析、车辆地面力学的研究. ORCID:0000-0003-1451-9156. E-mail:chengzhun38@163.com
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

程准,鲁植雄,龚佳慧,刁秀永 . 转向系统传递函数的研究及理想传动比获取[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2016.07.008.

CHENG Zhun,LU Zhi xiong,GONG Jia hui,DIAO Xiu yong. Transfer function of steering system and acquisition method of ideal steering ratio. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2016.07.008.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2016.07.008        http://www.zjujournals.com/eng/CN/Y2016/V50/I7/1276

[1] 郑宏宇,宗长富,王祥. 汽车线控转向系统路感模拟方法[J]. 农业机械学报,2011,42(2):18-22.
ZHENG Hongyu,ZONG Changfu,WANG Xiang. Road feel design for vehicle steerbywire system [J]. Transactions of the Chinese Society for Agricultural Machinery,2011,42(2):18-22.
[2] 郑宏宇,陈国迎,孙琳琳,等. 基于线控转向系统的路面参数估计[J]. 吉林大学学报:工学版,2014,44(2):292-295.
ZHENG Hongyu, CHEN Guoying, SUN Linlin, et al. Tireroad friction coefficient estimation based on steerbywire system [J].Journal of Jilin Universiy: Engineering and Technology Edition,2014,44(2):292-295.
[3] 鲁植雄,刁秀永,龚佳慧,等. 轮式拖拉机线控液压转向系统路感特性与评价[J]. 农业工程学报,2015,31(12):57-63.
LU Zhixiong,DIAO Xiuyong,GONG Jiahui,et al. Assessment and characteristic of roadfeeling for wheeled tractor hydraulic steerbywire system [J]. Transactions of the Chinese Society of Agricultural Engineering,2015,31(12):57-63.
[4] 郑宏宇,王祥,宗长富,等. 力控和位置反馈型线控转向系统双向控制策略[J]. 农业机械学报,2014,45(6):14-19.
ZHENG Hongyu, WANG Xiang, ZONG Changfu,et al. Bilateral control strategy of steerbywire system using force control and position deviation feedback [J]. Transactions of the Chinese Society for Agricultural Machinery, 2014, 45(6):14-19.
[5] ASAI S,KUROYANAGI H,TAKEUCHI S. Development of a steerbywire system with force feedback using a disturbance observer [C]∥ 2004 SAE World Congress. Detroit:[s. n.],2004:18.
[6] 于蕾艳,林逸,施国标. 线控转向系统的主动转向控制策略[J]. 农业机械学报,2008,39(1):46.
YU Leiyan,LIN Yi,SHI Guobiao. Active steering control strategy of steerbywire system [J]. Transactions of the Chinese Society for Agricultural Machinery,2008,39(1):46.
[7] 郑宏宇. 汽车线控转向路感模拟与主动转向控制策略研究[D]. 长春:吉林大学,2009:13.
ZHENG Hongyu. Research on road feeling and active steering control strategy for vehicle steeringbywire system [D]. Changchun:Jilin University,2009:13.
[8] YAMAGUCHI Y,MURAKAMI T. Adaptive control for virtual steering characteristics on electric vehicle using steerbywire system [J]. IEEE Transactions on Industrial Electronics,2009,56(5):1585-1594.
[9] 高举成,张兆合,罗丽君,等. 汽车操纵稳定性的广义汽车转向稳态响应模型[J]. 公路交通科技,2005,22(6):147-150.
GAO Jucheng,ZHANG Zhaohe,LUO Lijun,et al. A generalized model for vehicle steering steady state response of control stability performance [J]. Journal of Highway and Transportation Research and Development,2005,22(6):147-150.
[10] 周玉财,何仁,陈士安,等. 考虑空气力的车辆三自由度转向模型与状态方程[J]. 交通运输工程学报, 2009, 9(1):29-34.
ZHOU Yucai,HE Ren,CHEN Shian,et al. ThreeDOF vehicle steering model and state equations based on considering air forces [J]. Journal of Traffic and Transportation Engineering,2009,9(1):29-34.
[11] VIJAY ALAGAPPAN A,NARASIMHA RAO K V,KRISHNA KUMAR R. A comparison of various algorithms to extract magic formula tyre model coefficients for vehicle dynamics simulations [J]. Vehicle System Dynamic,2015,53(2):154-178.
[12] 施国标,申荣卫,林逸. 电动助力转向系统的建模与仿真技术[J]. 吉林大学学报:工学版,2007,37(1):31-36.
SHI Guobiao,SHEN Rongwei,LIN Yi. Modeling and simulation of electric power steering system [J]. Journal of Jilin University: Engineering and Technology Edition,2007,37(1):31-36.
[13] 唐绍丰. 基于模糊自适应PID控制的汽车线控转向系统研究[D]. 淄博:山东理工大学,2011:11-14.
TANG Shaofeng. Research on automobile steer by wire system based on fuzzy adaptive PID control [D]. Zibo:Shandong University of Technology,2011:11-14.
[14] 刘爱军,杨育,李斐,等. 混沌模拟退火粒子群优化算法研究及应用[J]. 浙江大学学报:工学版,2013, 47(10):1722-1730.
LIU Aijun,YANG Yu,LI Fei,et al. Chaotic simulated annealing particle swarm optimization algorithm research and its application [J]. Journal of Zhejiang University: Engineering Science,2013, 47(10):1722-1730.
[15] 刘俊玮,王子豪. 基于模拟退火与Dijkstra算法的复杂网状结构供应链最优化研究[J]. 浙江大学学报:理学版,2014,41(2):149-152.
LIU Junwei,WANG Zihao. Optimization research of the complex network structure supply chain based on simulated annealing and Dijkstra algorithm [J]. Journal of Zhejiang University: Science Edition,2014, 41(2):149-152.
[16] 孙士平,曾庆龙,吴建军. 基于改进模拟退火算法的复合材料层合板屈曲优化[J]. 中国机械工程,2015,26(12):1676-1683.
SUN Shiping,ZENG Qinglong,WU Jianjun. Buckling optimization of composite laminates based on improved simulated annealing algorithm [J]. China Mechanical Engineering,2015, 26(12):1676-1683.
[17] 余志生. 汽车理论[M]. 北京:机械工业出版社,2009:144-162.
[18] 宗长富,郑宏宇,田承伟,等. 线控转向稳态增益与动态反馈校正控制算法[J]. 汽车工程,2007,29(8):686-691.
ZONG Changfu,ZHENG Hongyu,TIAN Chengwei,et al. Steadystate gain and dynamic feedback correction algorithm for steerbywire [J]. Automotive Engineering,2007,29(8):686-691.
[19] 马建,冯镇,宋宏勋. 基于非线性系统结构稳定性理论的车辆转向动力学研究[J]. 中国公路学报,2015,28(3):110-116.
MA Jian,FENG Zhen,SONG Hongxun. Study on vehicle steering dynamics based on structural stability theory of nonlinear system [J]. China Journal of Highway and Transport,2015,28(3):110-116.
[20] 王春燕,崔滔文,赵万忠,等. 基于理想传动比的主动前轮转向控制[J]. 农业工程学报,2015,31(4):85-90.
WANG Chunyan,CUI Taowen,ZHAO Wanzhong,et al. Active front wheel steering control based on ideal transmission ratio [J]. Transactions of the Chinese Society of Agricultural Engineering,2015,31(4):85-90.

[1] 付宏勋, 赵又群, 林棻, 杜现斌, 倪新伟. 机械弹性车轮稳态侧偏特性的理论与试验分析[J]. 浙江大学学报(工学版), 2017, 51(2): 344-349.
[2] 葛正, 王维锐, 王俊鼎. 电子机械制动器间隙调整控制策略研究[J]. 浙江大学学报(工学版), 2017, 51(1): 138-144.
[3] 潘宁, 于良耀, 张雷, 宋健, 张永辉. 电液复合制动系统防抱控制的舒适性[J]. 浙江大学学报(工学版), 2017, 51(1): 9-16.
[4] 王静, 蔡忆昔, 包伟伟, 李慧霞. 离子风强化大功率LED散热的实验研究[J]. 浙江大学学报(工学版), 2016, 50(10): 1952-1958.
[5] 夏玉峰, 任莉, 叶彩红, 王力. 基于RSM的立柱加强板定位布局多目标优化[J]. 浙江大学学报(工学版), 2016, 50(8): 1600-1607.
[6] 裴晓朋,王国林,周海超,赵璠. 胎面结构设计参数对轮胎振动噪声的影响[J]. 浙江大学学报(工学版), 2016, 50(5): 871-878.
[7] 马浩军,朱绍鹏,俞小莉,许印川,林鼎. 考虑侧倾运动的电动汽车电子差速控制[J]. 浙江大学学报(工学版), 2016, 50(3): 566-573.
[8] 柯俊,史文库,钱琛,李国民,袁可. 复合材料板簧刚度的预测及匹配设计方法[J]. 浙江大学学报(工学版), 2015, 49(11): 2103-2110.
[9] 邱斌斌, 朱绍鹏, 马浩军, 方光明, 应振有, 宁晓斌. 电动车辆驱动控制系统仿真测试平台设计[J]. 浙江大学学报(工学版), 2015, 49(6): 1154-1159.
[10] 邱斌斌,朱绍鹏,马浩军,方光明,应振有,宁晓斌. 电动车辆驱动控制系统仿真测试平台设计[J]. 浙江大学学报(工学版), 2015, 49(2): 4-5.
[11] 唐昉,周晓军,魏燕定. 改善人-车综合性能的变传动比反馈方法[J]. J4, 2014, 48(3): 456-462.
[12] 王泽贵, 裴质明, 郝志勇, 缪勇, 周益, 周观鹏, 田文华.  汽车变速器齿轮啸叫噪声试验[J]. J4, 2013, 47(7): 1307-1312.
[13] 魏春雨, 周晓军, 魏燕定, 黎建军. 汽车驾驶模拟器转向盘能量反馈调节[J]. J4, 2013, 47(2): 244-248.
[14] 张志刚, 周晓军, 李永军, 沈路, 杨富春. 湿式多片换档离合器带排转矩的预测模型[J]. J4, 2011, 45(4): 708-713.
[15] 余跃, 周鸿波, 童水光, 陈新弟. 大客车侧翻耐撞性的结构设计方法[J]. J4, 2011, 45(4): 714-718.