Please wait a minute...
浙江大学学报(工学版)
浙江大学学报(工学版)
机械工程     
基于群聚参数网络分析的产品方案设计评价
吴晨睿, 张树有, 刘晓健
浙江大学 流体传动及控制国家重点实验室,浙江 杭州 310027
Product scheme design evaluation based on coupling network analysis of cluster parameters
WU Chen-rui, ZHANG Shu-you, LIU Xiao-jian
State Key Laboratory of Fluid Power Transmission and Control,Zhejiang University,Hangzhou 310027, China
 全文: PDF(1471 KB)   HTML
摘要：

针对产品方案设计评价中设计指标多层耦合问题,提出方案设计参数网络分析重要度求解模型.考虑群聚参数指标的依赖与反馈,应用决策试验与评价实验室方法计算耦合度.将关联矩阵归一化后分别与设计参数指标超矩阵中相应分块矩阵相乘,修正设计参数网络分析模型中分块矩阵权重分配问题.运用排序组织法,将评价指标赋予不同偏好函数,并设置双阈值获取偏好信息,解决语言评价向数值转换的离散性与定量设计参数非线性评价问题,通过计算备选方案的出流、入流、净流并进行排序,求得最优方案设计案例.以数控机床产品方案设计为例说明该方法的有效性.
Abstract:

A mathematical model was established to solve the coupled relationship among multilayers of design parameters based on network analysis of scheme parameters. The model considered the dependence and feedback of clustering parameters. DEMATEL method was used to calculate the coupling degree and causality of the clustering parameters in the model. The problem of parameters’ weights distribution was solved by multiplying the normalized correlation matrix and the corresponding block matrix of design parameters separately. Then PROMETHEE was used to assign different preference functions to the assessment index. Dual-threshold was set to get preference information. So that the problem of conversing from specialists’ language evaluation to values was solved. The optimal scheme design case was found out by calculating the alternatives’ outflow, inflow and net flow. An example of a CNC machine tool was validated using the proposed method.
出版日期: 2015-08-01
:  TH 122  
基金资助:

国家自然科学基金资助项目（51275458）、国家“863”高技术研究发展计划资助项目（2013AA041303）.
通讯作者: 张树有,男,教授,博导     E-mail: zsy@zju.edu.cn
作者简介: 吴晨睿,（1989—）,男，博士生,从事产品数字化设计、制造业信息化关键技术等方向研究.E-mail: wcr636489@163.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章　　

引用本文:

吴晨睿, 张树有, 刘晓健. 基于群聚参数网络分析的产品方案设计评价[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2015.08.013.

WU Chen-rui, ZHANG Shu-you, LIU Xiao-jian. Product scheme design evaluation based on coupling network analysis of cluster parameters. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2015.08.013.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2015.08.013    或    http://www.zjujournals.com/eng/CN/Y2015/V49/I8/1495

［1］ HSU W, WOON I M. Current research in the conceptual design of mechanical products ［J］. Computer-Aided Design， 1998, 30(5): 377-389.
［2］ JENAB K, SARFARAZ A, AMELI M T. A conceptual design selection model considering conflict resolution ［J］. Journal of Engineering Design, 2013, 24(4): 293-304.
［3］ VANEGAS L V, LABIB A W. Fuzzy approaches to evaluation in engineering design ［J］. Journal Of Mechanical Design， 2005, 127(1): 24-33.
［4］ VINODH S, VARADHARAJAN A R, SUBRAMANIAN A. Application of fuzzy VIKOR for concept selection in an agile environment ［J］. The International Journal of Advanced Manufacturing Technolog, 2013, 65(5/8): 825-832.
［5］ ZHAI L, KHOO L, ZHONG Z. Design concept evaluation in product development using rough sets and grey relation analysis ［J］. Expert Systems with Applications, 2009, 36(3): 7072-7079.
［6］ DELICE E K, GNGR Z. A mixed integer goal programming model for discrete values of design requirements in QFD ［J］. International Journal of Production Research, 2011, 49(10): 2941-2957.
［7］ CHEN L, KO W. Fuzzy linear programming models for NPD using a four-phase QFD activity process based on the means-end chain concept ［J］. European Journal of Operational Research, 2010, 201(2): 619-632.
［8］ 曹鹏彬,肖人彬,库琼.公理设计过程中耦合设计问题的结构化分析方法［J］.机械工程学报.2006, 42(3): 46-55.
CAO Peng-bin, XIAO Ren-Bin, KU Qiong. Structural analytical approach to coupled design in design with axiomatic design ［J］. Chinese Journal of Mechanical Engineering, 2006, 42(3): 46-55.
［9］ 薄瑞峰,李瑞琴.基于模糊效用值排序的模糊层次分析法在机械运动方案优选中的应用［J］.中国机械工程.2007(18): 2174-2178.
BO Rui-feng,LI Rui-Qin. Application of utility value ranking based fuzzy ahp method in evaluating mechanical kinematic schemes ［J］. China Mechanical Engineering, 2007(18): 2174-2178.
［10］ 孙良峰,裘乐淼,张树有,等.基于泛逻辑推理的复杂产品融合绿色性分析的设计方案评价技术［J］.计算机集成制造系统.2013(08): 1990-1999.
SUN Liang-Feng,QIU Le-Miao,ZHANG Shu-You,et al. Evaluation of design scheme for complex product combined with green performance based on generalized logic analysis ［J］. Computer Integrated Manufacturing Systems, 2013(08): 1990-1999.
［11］ TZENG G, CHIANG C, LI C. Evaluating intertwined effects in e-learning programs: A novel hybrid MCDM model based on factor analysis and DEMATEL ［J］. Expert Systems With Applications, 2007, 32(4): 1028-1044.
［12］ CHANG D. Applications of the extent analysis method on fuzzy AHP ［J］. European Journal of Operational Research, 1996, 95(3): 649-655.
[1] 李特, 芮执元, 雷春丽, 郭俊锋, 胡赤兵. 考虑气隙变化的高速电主轴热特性仿真[J]. 浙江大学学报(工学版), 2016, 50(5): 941-948.
[2] 冀瑜,邱清盈,冯培恩,黄浩. 国际专利分类表中设计知识的提取和利用[J]. 浙江大学学报(工学版), 2016, 50(3): 412-418.
[3] 吕茂印, 徐月同, 叶国云, 姚鑫骅. 基于量子行为粒子群的非对称转向机构优化[J]. 浙江大学学报(工学版), 2016, 50(2): 218-223.
[4] 陈实, 杨智渊, 孙凌云, 楼赟. 草图设计知识分析方法——结合语音能量和创意拐点[J]. 浙江大学学报(工学版), 2015, 49(11): 2073-2082.
[5] 陈进,庆飞,庞晓平. 基于组合挖掘的反铲液压挖掘机工作装置优化设计[J]. 浙江大学学报(工学版), 2014, 48(9): 1654-1660.
[6] 盖宇春, 朱伟东, 柯映林. 三坐标定位器部件刚度配置方法[J]. 浙江大学学报(工学版), 2014, 48(8): 1434-1441.
[7] 杨巍,张秀峰,杨灿军,吴海杰. 基于人机5杆模型的下肢外骨骼系统设计[J]. J4, 2014, 48(3): 430-435.
[8] 刘征, 顾新建, 潘凯, 杨青海. 基于TRIZ的产品生态设计方法研究——融合规则和案例推理[J]. J4, 2014, 48(3): 436-444.
[9] 程吉祥,顾新建,代风,刘征. 基于BioTRIZ的产品创新设计过[J]. J4, 2014, 48(1): 35-41.
[10] 盖宇春, 朱伟东, 柯映林. 大型飞机总装配中支撑点设计分析技术[J]. J4, 2013, 47(12): 2176-2183.
[11] 林晓华, 冯毅雄, 谭建荣. 基于免疫优化的产品系统可靠性参数区间预测方法[J]. J4, 2013, 47(6): 1013-1021.
[12] 应征, 王青, 李江雄, 柯映林,孙文博,韩永伟. 飞机数字化装配系统运动数据集成及监控技术[J]. J4, 2013, 47(5): 761-767.
[13] 应征, 章明, 王青, 柯映林. 飞机大部件调姿机构磨损预测模型的构建与仿真[J]. J4, 2013, 47(2): 209-215.
[14] 刘曦泽, 祁国宁, 傅建中, 樊蓓蓓, 许静. 集成形态学矩阵与冲突解决原理的设计过程模型[J]. J4, 2012, 46(12): 2243-2251.
[15] 黄雪梅, 张磊安, 魏修亭. 兆瓦级风机叶片静力加载过程D-MFAC控制[J]. J4, 2012, 46(12): 2280-2284.