Constant-force jack unloading method for removing temporary supports from large-span steel roof" /> 大跨度屋盖钢结构拆撑过程恒力千斤顶卸载法
Please wait a minute...
浙江大学学报(工学版)
土木工程、建筑工程     
大跨度屋盖钢结构拆撑过程恒力千斤顶卸载法
郭小农1, 杨商飞1, 罗永峰1, 邱丽秋1, 郁政华2, 郑祥杰2
1.同济大学 建筑工程系,上海 200092;2.上海市机械施工集团有限公司,上海 200439
Constant-force jack unloading method for removing temporary supports from large-span steel roof
GUO Xiao-nong1, YANG Shang-fei1, LUO Yong-feng1, QIU Li-qiu1, YU Zheng-hua2, ZHENG Xiang-jie2
1. Department of Building Engineering, Tongji University, Shanghai 200092, China;2. Shanghai Mechanized Construction Group Limited Company, Shanghai 200439, China
 全文: PDF(1425 KB)   HTML
摘要:

针对大跨度屋盖钢结构的拆撑过程,提出新的卸载方法——恒力千斤顶卸载法,采用ANSYS中的COMBIN37单元来模拟恒力千斤顶单元.建立经典算例的数值分析模型,分别采用支座位移法、等效杆端位移法、千斤顶单元法、约束方程法以及恒力千斤顶法对卸载过程进行分析.分析结果表明,相对于传统的位移卸载模拟方法,采用恒力千斤顶卸载法能够有效地控制卸载过程中千斤顶轴力的变化,结构的内力和挠度变化更加均匀可控,特别适用于刚度较大的大跨度屋盖钢结构.

Abstract:

In view of removing temporary supports from the large span steel structural roof, a new unloading method which was called constant-force jack unloading method was proposed. The constant jack with COMBIN37 element of ANSYS was simulated. Then a classic numerical analysis model was constructed, and was analyzed respectively by support displacement method, the equivalent rod end displacement method, jack element method, constraint equation method and constant-force jack unloading method. The analysis results show that compared with the traditional displacement-control method, the constant-force jack unloading method can effectively control the force change of the jack. The internal force and deflection of the structure were more efficiently controlled. The constant-force jack unloading method is especially applicable to the structure with large stiffness.

出版日期: 2014-10-01
:  TU 311  
通讯作者: 罗永峰,男,教授     E-mail: yfluo93@tongji.edu.cn
作者简介: 郭小农(1977—),男,讲师,从事钢结构的研究. E-mail: guo-xiao-nong@tongji.edu.cn
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

郭小农, 杨商飞, 罗永峰, 邱丽秋, 郁政华, 郑祥杰. 大跨度屋盖钢结构拆撑过程恒力千斤顶卸载法[J]. 浙江大学学报(工学版), 10.3785/j.issn.1008-973X.2014.10.014.

GUO Xiao-nong, YANG Shang-fei, LUO Yong-feng, QIU Li-qiu, YU Zheng-hua, ZHENG Xiang-jie.

Constant-force jack unloading method for removing temporary supports from large-span steel roof
. JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE), 10.3785/j.issn.1008-973X.2014.10.014.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2014.10.014        http://www.zjujournals.com/eng/CN/Y2014/V48/I10/1809

null
[1] 苏亮, 宋明亮, 董石麟, 罗尧治. 循环遗传聚类法稳定图自动分析[J]. 浙江大学学报(工学版), 2017, 51(3): 514-523.
[2] 潘炜, 吴慧, 李铁瑞, 高博青. 基于曲面展开的自由曲面网格划分[J]. 浙江大学学报(工学版), 2016, 50(10): 1973-1979.
[3] 崔璟, 尹凌峰, 郭小明, 唐敢. 基于残余位移的空间结构火灾温度场推定方法[J]. 浙江大学学报(工学版), 2016, 50(4): 720-726.
[4] 崔国勇, 崔昌禹, 涂桂刚. 自由曲面混凝土结构力学特性[J]. 浙江大学学报(工学版), 2015, 49(10): 1960-1966.
[5] 刘扬,鲁乃唯,蒋友宝. 结构体系可靠度分析的改进支持向量回归[J]. 浙江大学学报(工学版), 2015, 49(9): 1692-1699.
[6] 赖雄鸣, 张勇, 王成, 言兰, 缑锦. 基于OELM重构极限状态函数的可靠度计算方法[J]. 浙江大学学报(工学版), 2015, 49(4): 692-698.
[7] 苏亮,索靖,宋明亮. 钢筋砼框架结构易损性评估的参数敏感性分析[J]. 浙江大学学报(工学版), 2014, 48(8): 1384-1390.
[8] 殷平,王彤,谢旭. 考虑桥墩轴力变化影响的刚构桥近场地震反应[J]. J4, 2013, 47(11): 1896-1903.
[9] 苏亮,索靖. 等效线性化方法在基于位移抗震设计中的应用[J]. J4, 2013, 47(11): 1926-1931.
[10] 余佳亮, 罗尧治. 张弦立体桁架抗扭刚度对结构稳定性能的影响[J]. J4, 2013, 47(8): 1353-1360.
[11] 钟振宇, 楼文娟. 设置非等截面TLCD高层建筑在风荷载作用下减振分析[J]. J4, 2013, 47(6): 1081-1087.
[12] 罗尧治, 丁慧. 波纹表面月牙形悬挑屋盖风荷载特性[J]. J4, 2013, 47(6): 1063-1071.
[13] 屠海滨,陈伟球,金贤玉. 基于压缩传感的EMI信号处理[J]. J4, 2012, 46(11): 2007-2012.
[14] 袁行飞, 周练. 基于机构位移模态子矩阵法的
铰接杆系机构奇异与运动分岔分析
[J]. J4, 2012, 46(6): 1074-1081.
[15] 徐海巍,余世策,楼文娟. 开孔结构内压传递方程的适用性分析[J]. J4, 2012, 46(5): 811-817.