Please wait a minute...
J4  2012, Vol. 46 Issue (6): 1074-1081    DOI: 10.3785/j.issn.1008-973X.2012.06.018
土木工程     
基于机构位移模态子矩阵法的
铰接杆系机构奇异与运动分岔分析
袁行飞, 周练
浙江大学 空间结构研究中心,浙江 杭州 310058
Singularity and kinematic bifurcation analysis of pin-bar mechanisms
based on submatrix method of mechanism displacement mode
YUAN Xing-fei, ZHOU Lian
Space Structures Research Center, Zhejiang University, Hangzhou 310058, China
 全文: PDF  HTML
摘要:

 提出通过追踪机构位移模态子矩阵行满秩与否来判断机构运动分岔点的新方法——机构位移模态子矩阵法.该方法将铰接杆系机构的自由节点分为驱动节点和从动节点,对应描述机构构型的变量分别为控制变量和状态变量.建立铰接杆系机构平衡矩阵,由奇异值分解得到整体机构位移模态,定义驱动节点对应的机构位移模态矩阵和从动节点对应的机构位移模态矩阵为机构位移模态子矩阵,当机构位移模态子矩阵出现非行满秩现象时,驱动节点或从动节点获得自由度,机构运动发生奇异.通过单自由度和两自由度机构算例分析证明了此方法的正确性与有效性.

Abstract:

A new approach called submatrix method of mechanism displacement mode was proposed to detect kinematic bifurcations of mechanisms by tracking the transposed matrixes of mechanism displacement mode are row full rank or not. Free joints of pin-bar mechanisms were divided into actuated and passive joints, whose corresponding variables describing configurations of mechanisms were called controlling variables and state variables, respectively. The equilibrium matrix of pin-bar mechanisms was established and the global mechanism displacement mode was obtained by singular value decomposition. The matrix corresponding to the actuated joints and the passive joints were defined as submatrix of mechanism displacement mode. When the above submatrix was not row full rank, the actuated and passive joints obtained degrees of freedom and kinematic bifurcations of mechanisms happened. The validity of the proposed method was illustrated by single degree of freedom(SDOF) and 2DOF mechanisms.

出版日期: 2012-07-24
:  TU 323  
基金资助:

 国家自然科学基金重点资助项目(50638050);浙江省重点科技创新团队资助项目(2010R50034).

作者简介: 袁行飞(1972—),女,教授,博导,主要从事大跨空间结构相关研究. E-mail:yuanxf@zju.edu.com.
服务  
把本文推荐给朋友
加入引用管理器
E-mail Alert
RSS
作者相关文章  

引用本文:

袁行飞, 周练. 基于机构位移模态子矩阵法的
铰接杆系机构奇异与运动分岔分析[J]. J4, 2012, 46(6): 1074-1081.

YUAN Xing-fei, ZHOU Lian. Singularity and kinematic bifurcation analysis of pin-bar mechanisms
based on submatrix method of mechanism displacement mode. J4, 2012, 46(6): 1074-1081.

链接本文:

http://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2012.06.018        http://www.zjujournals.com/eng/CN/Y2012/V46/I6/1074

[1] GOSSELIN C. Kinematic analysis, optimization and programming of parallel robotic manipulators [D]. Montreal, Quebec, Canada: McGill University,1988.
[2] GOSSELIN C, ANGELES J. Singularity analysis of closedloop kinematic chains [J]. IEEE Transactions on Robotics and Automation, 1990, 6(3): 281-290.
[3] BANDYOPADHYAY S, GHOSAL A. Analysis of configuration space singularities of closedloop mechanisms and parallel manipulators [J]. Mechanism and Machine Theory, 2004, 39(5): 519-544.
[4] ALTUZARRA O, SALGADO, PETUYA V, et al. Computational kinematics for robotic manipulators: Jacobian problems [J]. Engineering Computations: International Journal for ComputerAided Engineering and Software, 2008, 25(1): 4-27.
[5] TARNAI T. Rigidity and kinematic bifurcation of structures [C]∥40th Anniversary Congress of the International Association for Shell and Spatial Structures (IASS). Madrid, Spain: IASS,1999,1: B2.81B2.90.
[6] LENGYEL A. Analogy between equilibrium of structures and compatibility of mechanism [D]. Oxford: University of Oxford, 2003.
[7] LENGYEL A, YOU Z. Analogy between bifurcations in stability of structures and kinematics of mechanisms [J]. Mechanics Based Design of Structures and Machines, 2003, 31(4): 491-507.
[8] LENGYEL A, YOU Z. Bifurcations of SDOF mechanisms using catastrophe theory [J]. International Journal of Solids and Structures, 2004, 41(2): 559-568.
[9] LENGYEL A, GASPAR Z. Classification of compatibility paths of SDOF mechanisms [J]. International Journal of Solids and Structures,2005,42(1): 21-36.
[10] KUMAR P, PELLEGRION S. Computation of kinematic paths and bifurcation points [J].International Journal of Solids and Structures, 2000, 37(46): 7003-7027.
[11] 沈金,楼俊晖,邓华.杆系机构的可动性和运动分岔分析 [J].浙江大学学报:工学版,2009,43(6): 1083-1089.
SHEN Jin, LOU Junhui, DENG Hua. Movability and kinematic bifurcation analysis for pinbar mechanisms [J]. Journal of Zhejiang University : Engineering Science, 2009, 43(6): 1083-1089.
[12] 徐静.铰接杆系机构的运动形态研究[D]. 杭州:浙江大学,2007.
XU Jing. Studies on the kinematic morphology of pinbar mechanisms [D]. Hangzhou: Zhejiang University, 2007.
[13] 陶亮.铰接杆系的机构运动研究[D].杭州:浙江大学,2008.
TAO Liang. Mechanism research of pinbar systems [D]. Hangzhou: Zhejiang University, 2008.
[14] 王玉新,李雨桐,郭瑞琴.并联机构以保持构型通过奇异位置的方法[J].机械工程学报,2008,44(6): 126-130.
WANG Yuxin, LI Yutong, GUO Ruiqin. Method for parallel manipulators to pass through singular points with its original configuration [J]. Chinese Journal of Mechanical Engineering, 2008, 44(6): 126-130.
[15] 陆启韶.分岔与奇异性[M]. 上海:上海科技教育出版社,1995: 65-108.

No related articles found!