Please wait a minute...
浙江大学学报(工学版)
J4  2011, Vol. 45 Issue (12): 2159-2168    DOI: 10.3785/j.issn.1008-973X.2011.12.014
土木工程、水利工程     
基于弧长法的平面连杆机构运动分析
祖义祯, 邓华
浙江大学 空间结构研究中心,浙江 杭州 310058
Kinematic analysis of planar pin-bar linkages
by arc-length method
ZU Yi-zhen, DENG Hua
Space Structures Research Centre, Zhejiang University, Hangzhou 310058, China
 全文: PDF  HTML
摘要：

将弧长法应用于平面连杆机构的运动解析,使得体系运动路径和形态稳定性跟踪可统一求解.基于有限元法,建立以驱动杆件伸长量为控制变量的连杆机构运动分析基本方程.提出弧长法求解体系运动路径的基本策略,并通过监测体系切线刚度矩阵最小特征值的变化来跟踪运动形态的稳定性.阐述了精确定位运动路径中奇异点的计算方法以及判别奇异点是否为运动分岔点的准则.进一步通过增加约束条件并修改控制方程,实现分岔路径的跟踪.将一采用“机构法”施工的柱面网壳简化为平面连杆机构,根据基于弧长法的机构运动分析方法分析了不同分段、不同吊索布置情况下机构的提升形态特点.计算结果表明：该弧长法计算策略能够有效实现平面连杆机构的施工路径模拟和临界状态的判别.
Abstract:

The arc-length method was applied for the kinematic analysis of planar pin-bar linkages, so the kinematic path and state stability of those systems could be solved in a unified way. Based on the finite element method(FEM), the basic kinematic equation of pinbar linkages was established with the control parameters defined as the elongations of driving bars. An arc-length numerical strategy was put forward to solve the kinematic path of pin-bar linkages. The variance of minimal eigenvalue of tangent stiffness matrix was employed to determine the stability of equilibrium configuration on the kinematic trajectory. The method for pinpointing the singular point in the kinematic path was presented, and the criterion for determining the bifurcation of those singular points was also discussed. In order to trace the bifurcation paths, the basic kinematic equation was further reconstructed by introducing an additional constraint equation. An illustrative example of reticulated cylindrical shell with ‘mechanismmethod’ erection, which has been modelled as a pinbar linkage, was analyzed by the method put forward to investigate the state characteristics during lifting under different segment divisions and slings layouts. The result shows that this arclength computational strategy is valid for the simulation of lifting process and determination of critical state of planar pinbar linkages.
出版日期: 2011-12-01
:  TU 323  
基金资助:

国家自然科学基金资助项目(50978226);国家科技支撑计划资助项目(2006BAJ03A03-03);浙江大学-浙江展诚建设集团现代施工技术中心资助项目.
通讯作者: 邓华，男，博士，教授.     E-mail: denghua@zju.edu.cn
作者简介: 祖义祯(1987—)，女，博士生，从事空间结构研究.E-mail:zuamanda@163.com
服务　　
把本文推荐给朋友
加入引用管理器
E-mail Alert
作者相关文章　　

引用本文:

祖义祯, 邓华. 基于弧长法的平面连杆机构运动分析[J]. J4, 2011, 45(12): 2159-2168.

ZU Yi-zhen, DENG Hua. Kinematic analysis of planar pin-bar linkages
by arc-length method. J4, 2011, 45(12): 2159-2168.

链接本文:

https://www.zjujournals.com/eng/CN/10.3785/j.issn.1008-973X.2011.12.014    或    https://www.zjujournals.com/eng/CN/Y2011/V45/I12/2159

［1］ ONODA J. Twodimensionally deployable truss structures for space application［J］. Journal of Spacecraf and Rockets, 1988, 25(2): 109-116.
［2］ GUEST S D, PELLEGRINO S. A new concept for solid surface deployable antennas［J］. Acta Astronautica, 1996, 38(2): 103-113.
［3］ GANTES G C. Deployable structures: analysis and design［M］. Southampton ：WIT Press, 2001.
［4］ GEIGER D H, STENFANIUK A, CHEN D.The design and construction of two cable domes for the Korean Olympics［C］∥Proceedings of the International Association of Space StructuresAmerican Society of Civil Engineering. Int Symp. New York: Elsevier, 1986, 265-272.
［5］ KAWAGUCHI M. Engineering aspects of space frames ［C］∥Proceedings of the International Association of Space Structures Colloquium. New York: Elsevier, 1997: 51-62.
［6］ KUMAR P, PELLEGRINO S. Computation of kinematic paths and bifurcation points［J］. International Journal of Solids and Structures, 1999, 37(46/47): 7003-7027.
［7］ 张其林,罗晓群,杨晖柱.索杆体系的机构运动及其与弹性变形的混合问题［J］.计算力学学报,2004,21(4): 470-474.
ZHANG Qilin, LUO Xiaoquen,YANG Huizhu. Mechanism motion and motiondeformation hybrid problems of cable—member systems［J］. Chinese Journal of Computational Mechanics, 2004, 21(4): 470-474.
［8］ 谢铁华,关富玲,苏斌.空间索杆式展开结构的动力学研究与分析\
[J\].空间结构,2004,10(3): 48-54.
XIE Tiehua, GUAN Fuling, SU Bin. Research and analysis on dynamic properties of spatial Rodcable deployable structure［J］. Spatial Structures, 2004, 10(3): 48-54.
［9］ 蒋本卫,邓华,伍晓顺.平面连杆机构的提升形态及稳定性分析［J］.土木工程学报,2010,43(1): 13-21 .
JIANG Benwei, DENG Hua, WU Wushuen. Kinematic state and stability analysis for planar linkages during lifting erection［J］. China Civil Engneering Journal, 2010, 43(1): 13-21.
［10］ 沈金,楼俊晖,邓华.杆系机构的可动性和运动分岔分析［J］.浙江大学学报:工学版,2009, 43(6): 1083-1089.
SHEN Jin, LOU Juenhui, DENG Hua. Movability and kinematic bifurcation analysis for pinbar mechanisms［J］. Journal of Zhejiang University: Engineering Science, 2009, 43(6): 1083-1089.
［11］ 包红泽,邓华.铰接杆系机构稳定性条件分析［J］.浙江大学学报：工学版,2006,40(1): 78-84.
BAO Hongze, DENG Hua. Analysis of stability conditions of pinbar mechanisms［J］. Journal of Zhejiang University： Engineering Science, 2006,40(1): 78-84.
［12］ CRISFIELD M A. Nonlinear Finite Element Analysis of Solids and Structures, Volume 2: Advanced Topics［M］. Chichester: Wiley, 1997.
［13］ BERGAN P G, HORRIGMOE G, KRAKELAND B, et al. Solution techniques for nonlinear finite element problems［J］. International Journal for Numerical Methods in Engineering, 1978, 12(11): 1677-1696.
［14］ BELLINI P X, CHULYA A. An improved automatic incremental algorithm for efficient solution of nonlinear finite element equation［J］. Computers and Structures, 1987, 26(1/2): 99-100.
［15］ BAZANT Z P, CEDOLIN L. Stability of Structures Elastic, Inelastic, Fracture and Damage Theories［M］. New York: Oxford University Press, 1991.
［16］ FUJII F. Computational bifurcation theory: pathtracing, pinpointing and pathswitching［J］. Engineering Structures, 1997,19(5): 385-392.
［17］ FUJII F, CHOONG K K. BranchSwitching in bifurcation of structures［J］. Journal of Engineering Mechanics, 1992,118(8): 1578-1592.
[1] 邓华, 祖义祯, 沈嘉嘉, 白光波, 董石麟, 张志宏, 陈玲秋. 月牙形索桁罩棚结构的施工成形分析和试验[J]. J4, 2013, 47(3): 488-494.
[2] 关富玲,戴璐. 双环可展桁架结构动力学分析与试验研究[J]. J4, 2012, 46(9): 1605-1610.
[3] 袁行飞, 周练. 基于机构位移模态子矩阵法的
铰接杆系机构奇异与运动分岔分析[J]. J4, 2012, 46(6): 1074-1081.
[4] 童根树, 郭峻. 剪切型支撑框架的假想荷载法[J]. J4, 2011, 45(12): 2142-2149.
[5] 蔡金标, 陈勇, 严蔚. 基于三维有限元分析的压电阻抗模型及其应用[J]. J4, 2010, 44(12): 2342-2347.
[6] 吴玉华, 楼文娟. 水平随机地震激励下弹性圆拱的半解析法[J]. J4, 2010, 44(1): 156-159+165.
[7] 郭佳民, 董石麟, 袁行飞, 等. 索穹顶结构施工模拟分析[J]. J4, 2009, 43(10): 1892-1896.